Cybernetic Prosthetics

From DigitalCraft_Wiki
Revision as of 11:54, 1 October 2018 by Tutu Guo (talk | contribs) (→‎Process)
Jump to navigation Jump to search

Inspired by whales that the sound they made underwater is so dim and distanced. We were standing in the entrance of blaak and hearing sharp noises from the surroundings, an idea of making analogue filter came up in our minds.

Research

Sound and light waves: https://www.youtube.com/watch?v=Io-HXZTepH4&t=1013s

8 Hours of Whale Sounds Deep Underwater: https://www.youtube.com/watch?v=nDqP7kcr-sc

Testing

The first (and only) prototype.

IMG 8751.jpg

We first used a plastic bucket to contain water, and leave the material problem to the later stage. We didn't get an underwater microphone, instead, we used a condom on a normal microphone for water prove. During the test on the desk, we realised the vibration transmitted by the attached material is extremely strong. To reduce it, we had a thick scarf. Afterwards, we decided to bring the device outside the studio to check the effect.

IMG 8752.jpg

IMG 8754.jpg

IMG 8757.jpg

The result of testing outside fitted our anticipation. And it also showed some improvement to be done.

Process

The device consisted of two parts, the analogue part and the digital part.

The bent metal is the main and constructed component, it was covered and patted with thick foam board in order to reduce the transmitted vibration. A big clip attached to the top of metal for hanging and stabilizing the microphone.

IMG 8770.jpg

The microphone was placed in a condom for waterproof, connected to a sound recorder for adjusting and a set headphone.

IMG 8788.jpg

Product

Aquatic Acoustic


Video Link : https://vimeo.com/292687674