THE CONCEPT

Aaron Boot
Spatial Design
aaron.boot@hotmail.com
0890035

Image ONE (the moment I knew what I wanted to do)

The Walt Disney concert hall - Frank Gehry - 2003
I love to make sculptures but Frank Gehry has inspired me to choose for Spatial instead of Autonomous because he make sculptural buildings with a lot of movement and energy in it. Truly fascinating in my eyes.

Image TWO (my background)

My creative background has deep roots by the flower parade from Zundert(biggest dahlia corso in the world) I have build the floats for over 9 years but since last year I am a designer of one of the twenty floats. Here you see the maquete for this year and the full scale float from last year.

Image THREE (topic of interest)

The coral landscape and the movement of them have brought my by Ora Ito he inspired his wallpaper on the sole of Reebok sneakers. He loved the way the sole bends and creates a moving landscape. He has tried to capture that movement in one piece of special acrylic. This quarter I want to actually let the wallpaper move.

Image FOUR (medium)

MAKING A MOLD (for the membrane)

I have chosen to make a coral landscpae istead of the wallpaper of Ora Ito beacause I think the corals have an even nicer and a more various lanscape than Ora's wallpaper.

Step 1 - make a landscape (relievo) you want, this is going to be your "positive" form
Step 2 - cover your relievo in acrilic one (an artificial plaster) or just plaster
Step 3 - repeat step 2 but dont forget to stronger your mold (with fiberglass)
Step 4 - repeat step 3 so your mold can be positioned in a stable postion so you can work better with it in a later stage
Step 5 - get your positive form out of your mold so you get a "negative" relievo which is your final mold
Step 6 - here you have your mold (negative) cover your mold in a mold release agent so you can get your print out
Step 7 - cover the mold in the chosen fluid (latex, silicone, etc.)

TESTING

I have first tested a technical option out of knex. In the movie you see a membrane out of elastic fabric.

The mechanics of the test. I was very glad with the visual outccome of this test. But I thought that it also could work in another way. Because the latex membrane had a lot of projections so the wheels wont ride smooth over the membrane.

Test 1: Membrane of high elastic fabric https://www.youtube.com/watch?v=md2VDZHLkGw&feature=youtu.be '

FINAL IDEA

By this principe the membrane is pushed from below so the mehanics won't stuck in the membrane. This principe would be 12x repeated.

FINAL PRODUCT

LAB

MEASURING VOLT, RESISTANCE & CURRENT

Measuring Voltage

3,15V

Measuring calculate Resistance

Resistor 1
Resistor 2
Resistor 3

serie resistance

R1+R2+R3= 109,20 Ohm 10.000+330+100.000= 110,33 Ohm

parallel resistance

De totale weerstand met 2 weerstanden = 500 Ohm 1000:2= 500 Ohm - dit komt omdat hij het aantal weerstanden deeld op de weer De totale weerstand met 3 weerstanden = 333 Ohm 1000:3= 333 - dit komt omdat hij het aantal weerstanden deeld op de weer

Mesuring Current

I=11,18 A

MAKING A CIRCUIT (Etching a Printed Circuit Board)

Step 1 - print your circuit on a plate of copper
Step 2 - etching the copper plate
Step 3 - I was to early in getting the plate out of the etching bath, soo my copper plate was failed
Step 4 - on another good circuit I have solder the componets
Step 4 - the final stage was putting the battery and speaker on so I could test the circuit