Difference between revisions of "User:R VDH"

From DigitalCraft_Wiki
Jump to navigation Jump to search
 
(42 intermediate revisions by the same user not shown)
Line 1: Line 1:
 
= '''Digital craft 3rd year practice''' =
 
= '''Digital craft 3rd year practice''' =
==Project 1: Cards==
+
[[File:Marley.jpg]]<br>
 +
<br>
 +
Rens van der Heijden<br>
 +
Fine Art and Teacher Training<br>
 +
0927125<br>
 +
<br>
 +
 
 +
= '''Written Assignment''' =
 +
My name is Rens van der Heijden and I am a student from the Teacher Training (third year). Not only am I learning to become a teacher for art and design, I am also working with different kinds of tools and materials to produce artwork. Basically, all kind of tools and media because I want to extend my knowledge. I think this is very important if I’m going to become a teacher of art and design. <br>
 +
<br>
 +
When I’m about to craft something, I usually focus and work too much. On one hand this is a good thing, because every time I’m giving it my all. I’m trying to make the best out of it. But on the other hand, working like this causes me to get frustrated. Because after some time working on a project, I get exhausted. <br>
 +
The best way to work for me is when I have to make/craft something and my components/tools/materials/software to make or craft are within reach. Somehow making and crafting feel more natural to me than writing an assignment for instance.<br>
 +
I also sometimes work with very few tools (on purpose) and a problem-solving method. Working on projects with very few tools causes me to get stuck very quick. Because of this, I’m challenging myself to test the tools it’s limits. What is my problem and what can I do with the tools I have? What other functions do my tools have? By doing this, I need to come up with creative ways to produce artwork. <br>
 +
<br>
 +
I think my main tool of my craft is drawing/painting with pen. Most of the time I drew with a pen in a little notebook and I used a drawing tablet and Adobe Photoshop to create paintings. But in the past years, I use tools like camera’s (filming and taking pictures), Virtual Reality, 3D objects and interventions. And now you might wonder? Well right now, I’m going back to my roots, which is drawing on paper. But this time I’m going to use charcoal to draw portraits. <br>
 +
I was always drawing as a kid. If there was paper and a pencil, I would draw. This passion has been growing until my third year at Grafisch Lyceum Rotterdam (which was 4 years ago). Between then and now I didn’t feel like drawing anymore. I still don’t know why. The passion, this flame, was gone. It had been gone for 4 years until a few months ago. Somehow the passion to draw came back. Not as big as usual, but it is back. And that is the most important thing for me. <br>
 +
<br>
 +
[[File:33020532 1533236303469971 5525330956489064448 o.jpg]]<br>
 +
<br>
 +
[[File:42342569 1702179083242358 1271700203862228992 o.jpg]]<br>
 +
<br>
 +
I choose this practice because of several reasons. This practice was more appealing to me compared to the other practices, where to me you’re almost forced to be some kind of activist. <br>
 +
I think Arduino and my record player where the most interesting things that have arisen during this Practice. Arduino really got my attention after the workshop, because I looked some stuff up about what you can make with Arduino. One of these things was making a real electric drum kit made of a plastic drum kit for a videogame. <br>
 +
The record player really surprised me because it let me experience sound in a different way. It really felt like magic. I somehow forgot that noises are actually vibrations.<br>
 +
<br>
 +
I actually don’t have a big history with the gramophone/record player. When my father was my age, he used to work in a record store. He loves music so he collected a lot of records during that time. When I was a kid, I sometimes searched for those records and just looked at the design of the covers. I couldn’t play the records because my father’s record player was broken. And with the rise newer technology like cd’s, the record player was forgotten for a while. But a few years ago, my father decided to repair it so he could play his old records. Now I’ve bought some records myself and I am using it more often than him.<br> 
 +
<br>
 +
There is a specific person I rediscovered during this practice. I’m talking about Jack White. A musician, who’s also known as the Willy Wonka of music because he has crazy projects where he is pushing boundaries. For instance, he is the first person who played a vinyl record in space using a “space proof” turntable attached to a high-altitude balloon. <br>
 +
He has also a very interesting opinion about records and record players. To him buying a record and listening to it is the same as going to the cinema to watch a brand-new film. You can listen to music by telephone or computer, but the record is a physical thing you can touch, you can smell etc. And when you want to make a record of something on vinyl, you need to do it in one take. If you make a mistake, you can hear it on the record. This is very hard for musicians. But to Jack White this is the best part about music. The mistakes make the music real. <br>
 +
<br>
 +
One thing I need to remember is the sentence on the building of Blaak: “I have to change to stay the same”. I think this is a very important lesson for every teacher who is standing in front of a class. Our world is changing and so is technology. That’s why I think it’s important to teach students about newer technologies instead of older ones. I think they might find older technology very boring because of its age. I also believe they might find it useless because the old technology is replaced with newer ones.<br>
 +
I also hope to learn during this Practice newer technologies for creative, activating and exciting lessons. Because I noticed during my internship that I find it difficult to create lessons for my class. It always becomes a traditional lesson. For instance, I’m standing in front of the class and I’m transferring information by talking instead of students trying to discover it by themselves out of curiosity. <br>
 +
I think lessons will be more interesting with technology if I demonstrate something. For instance, my record and the paper cone. Or the crazy and weird experiments you get at your science lessons. I also think that DIY kits are also great. You are learning by doing and making it by yourself. I think it would be even better if it is a puzzle. Because puzzles are fun to do, and when something is fun to do, it’s easier to remember. <br>
 +
<br>
 +
==Project 1: Critical Making exercise==
 
For this exercise, I’ve teamed up with 3 other students. Bart from the Teacher Training, Joep from Graphic Design and Mike from Autonomous. Together we’ve chose the following cards: “Clickbait or Listicles”, “Highlight a boring future that could result from” and “Use folded paper to create a physical model of this new thing”. <br>
 
For this exercise, I’ve teamed up with 3 other students. Bart from the Teacher Training, Joep from Graphic Design and Mike from Autonomous. Together we’ve chose the following cards: “Clickbait or Listicles”, “Highlight a boring future that could result from” and “Use folded paper to create a physical model of this new thing”. <br>
 
<br>
 
<br>
Line 9: Line 43:
 
<br>
 
<br>
 
<br>
 
<br>
==Project 2: Cards==
+
 
 +
==Project 2: Cybernetic Prosthetics==
 
Shred, melt, print. That's what our machine would do. We were given the assignment to make the concept for a bio-machine. A machine which had something to do with bio, biological, biology, bio industry, whatever.<br>
 
Shred, melt, print. That's what our machine would do. We were given the assignment to make the concept for a bio-machine. A machine which had something to do with bio, biological, biology, bio industry, whatever.<br>
 
<br>
 
<br>
 
The concept we developed is a composed machine consisting of three actual machines. A "shredder", a "melter" and a 3d printer.
 
The concept we developed is a composed machine consisting of three actual machines. A "shredder", a "melter" and a 3d printer.
The shredder is meant for shredding plastic waste, that shredded waste will be melted to a new 3d printer filament, this filament can be used to print again. So, in the end you’ll have three small DIY kits to recycle plastic and to provide yourself new useful tools.<br>
+
The shredder is meant for shredding plastic waste, that shredded waste will be melted to a new 3d printer filament, this filament can be used to print again. So in the end, you’ll have three small DIY kits to recycle plastic and to provide yourself new useful tools.<br>
 
<br>
 
<br>
 
For now we mainly focused on the shredder and did some research to the possibilities that, gives, with the goal to print a shredder from wasted plastic which will create a loop again.  
 
For now we mainly focused on the shredder and did some research to the possibilities that, gives, with the goal to print a shredder from wasted plastic which will create a loop again.  
Line 28: Line 63:
 
<br>
 
<br>
 
<br>
 
<br>
==Project 3: Black Box==
+
 
After Project 2, I’ve worked alone on the upcoming projects. For the Black Box project, I choose the record and the record player. It was a device which was such a mystery for me. I didn’t understand how information (in this case music) could be carved in records. And how do those carvings transform into music when we use a record player?<br>
+
==Project 3: From Devices to systems==
 +
After Project 2, I’ve worked alone on the upcoming projects. For the From Devices to systems project, I choose the record and the record player. It was a device which was such a mystery for me. I didn’t understand how information (in this case music) could be carved in records. And how do those carvings transform into music when we use a record player?<br>
 
<br>
 
<br>
 
Well in order to answer these questions better we need to take a closer look at the record:<br>
 
Well in order to answer these questions better we need to take a closer look at the record:<br>
Line 37: Line 73:
 
[[File:Close-up-Reccord-2.jpg]]<br>
 
[[File:Close-up-Reccord-2.jpg]]<br>
 
<br>
 
<br>
This is a close up of the carvings. When you put a record on the record player, the needle (which is attached to the arm) will sit in the carving. The needle makes contact with the sides of the carvings, which causes the needle to vibrate. These vibrations go through the arm to a magnet system. Then the vibrations go twice through an amplifier which amplifies the sound. Finally, the vibration come out through the big speakers. And we hear these vibrations as music.<br>
+
This is a close up of the carvings. When you put a record on the record player, the needle (which is attached to the arm) will sit in the carving. The needle makes contact with the sides of the carvings, which causes the needle to vibrate. These vibrations go through the arm to a magnet system. Then the vibrations go twice through an amplifier which amplifies the sound. Finally, the vibration comes out through the big speakers. And we hear these vibrations as music.<br>
 +
<br>
 +
After discovering this, I wondered if I could make my own record player with cheap material. So, I’ve found this video (www.youtube.com/watch?v=6FX4E2GHkWY) where someone uses a paper cone, tape and a very small needle to “hear” the sound on the record. I’ve tried to do the same, expecting this wouldn’t work. But it did work and it makes sense. The vibrations go through the cone and it amplifies the sound. If you shout through the cone, your voice will be amplified. Basically, I’ve recreated the Phonograph but with paper and you’ve had to turn the record by hand.<br>
 +
<br>
 +
[[File:Schermafbeelding 2019-01-05 om 15.39.44.png]]
 +
This is me and a classmate of mine trying to to play the record with a paper cone and a needle. Someone else filmed us. Unfortunately, I don't know to upload this video on the wiki
 +
 
 +
==Project 4: Cartography of Complex Systems & the Anthropocene==
 +
[[File:Mindmapping.jpg]]<br>
 +
<br>
 +
In this project, I did more research about the gramophone. I want to know how it’s possible to hear sound/music from the grooves of a piece of plastic. I also want to discover how they made them and how they changed form throughout the years. We start with the very first device for recording and replaying sound. <br>
 +
<br>
 +
<br>
 +
Phonograph<br>
 +
The phonograph (as a trademark since 1887 known as the gramophone) was a device for the mechanical recording and reproduction of sound. This device was invented by Thomas Edison in 1877. Below is a picture of the anatomy of the phonograph of Edison.<br>
 +
<br>
 +
[[File:Edisons speelgoed.gif]]<br>
 +
<br>
 +
His phonograph originally recorded sound onto a tinfoil sheet wrapped around the cylinder. This will rotate when you turn the hand crank. A stylus responding to sound vibrations produced an up and down groove in the foil. Around 1899, the cylinder changed to a wax-coated version.<br>
 +
<br>
 +
<br>
 +
[[File:Edisons speelgoed deel 2.png]]<br>
 +
This is a side view of the phonograph. If you want to record sound, you speak into the tube (1). The sound from your voice makes a diaphragm (like a drumhead/drumskin) vibrate, pushing a needle (2) back and forth. The needle is cutting a groove into the cylinder (3), which is slowly turned by a clockwork motor. Another needle (4) presses into the groove, bouncing up and down in the pattern previously cut there. Another diaphragm and horn (5) amplify the sounds and turn them back into sounds we can hear.<br>
 +
<br>
 +
But Edison wasn’t the only one. Before him there where already predecessors working on something similar. And even after Edisons invention someone else made an “improved” version of his phonograph. Emile Berliner made a gramophone, similar looking like the phonograph but without wax cylinder. Berliner used discs which could be played with a small hand propelled machine. This became the predecessor of the record player.<br>
 +
<br>
 +
[[File:Berliner disc recordd gramophone.jpg]]<br>
 +
<br>
 +
<br>
 +
<br>
 +
Record player<br>
 +
As we can see the record player looks similar to the gramophone of Berliner. Record players became extremely popular in the 60s and 70s when Dual released the first turntables to provide stereo playback. High-fidelity sound reproduction hit the scene and motivated countless people to add a record player in their home. The automatic high-fidelity turntable was an immediate hit in the early 60s.<br>
 +
<br>
 +
It also works similar like the phonograph. The stylus or needle attached to the tone arm is pressing into the groove and also bouncing up and down. Only this time, the vibrations are going through different amplifiers which amplify the sound. And you can even decide if you want it louder or softer.<br>
 +
<br>
 +
[[File:Turntable-Anatomy.jpg]]<br>
 +
<br>
 +
<br>
 +
<br>
 +
CD and digital <br>
 +
After a few years, the Compact Disc, or CD, unofficially arrived with the release of the Dire Straits’ Brothers in Arms album, which was recorded on the latest digital equipment and spawned a tour sponsored by Philips. The album became a musical mainstay, which resulted vinyl fans and audiophiles to purchase CD players in droves to adopt the growing format. CD sales overtook the vinyl in 1988 and in 1991 it overtook the cassette. <br>
 +
<br>
 +
During time, the CD became bigger and better. People could now buy a CD-RW (Compact Disc-ReWritable). It allowed people to put hundreds of songs form a friend’s hard drive onto discs which could be played in newer CD players and it could be shared with each other. This also caused the downfall of the CD. Napster, a website around 1999, allowed global users to easily share music files with 80 million users. Why buy something if you can download it on Napster? Eventually the website was shut down in 2001 and in the same year, Steve Jobs presented the MP3 player. With this, the sales of the CD began to slowly fade away.<br>
 +
<br>
 +
<br>
 +
<br>
 +
Vinyl revival<br>
 +
Around the early 2010s, the vinyl made a comeback. It was growing at a very fast rate. In some territories, it became even more popular since late 1980s. I believe the revival of the vinyl is a part of a greater revival of retro style. Jack White, a successful musician has even started his own record company because it fascinates him so much. To him buying a record is going to the cinema for a movie. <br>
 +
<br>
 +
[[File:Global Vinyl Sales Graph In US$.png]]
 +
[[File:UK Vinyl Sales Graph In £.png]]
 +
<br>
 +
<br>
 +
 
 +
= '''3rd Year Final Product''' =
 +
My final product for this practice was an analogue gramophone with an Instructable. The Instructable, written by me, is a tutorial which shows how to build your own analogue gramophone. I want to let people re-experience music/sound. <br>
 +
<br>
 +
The project has a connection with my major (teacher training). This device and the Instructable are great tools for a teacher to teach by demonstrating. But you can also let students discover it on their own. You give them the tools they need and let them try to use them. That’s also one of the main reasons why I’ve made an analogue version of it. I didn’t want it to be a “push-a-button-and-watch” machine. I want the viewer to be fully in control of the record player. He/she places the record on the gear, he/she turns the record, he/she holds the cone etc. I believe it will make the result more magical because you are the one that’s controlling the machine. <br>
 +
<br>
 +
This is the process of the analogue gramophone:<br>
 +
<br>
 +
<br>
 +
Plan A: Gear testing<br>
 +
First, I’ve wanted to make some kind of box with the record on top of it and a turning gear on the side. I looked back at the plastic grinder I’ve made before during this practice. I knew the hardest part about this design would be the gears. So, after some notes and a few sketches, I’ve made a few prototypes. And it was a disaster. It didn’t work. <br>
 +
But, when I was waiting for the laser cutter, I’ve accidently came up with a better design for the gramophone.<br>
 +
<br.>
 +
[[File:Aantekeningen-1.jpg]]<br>
 +
<br>
 +
[[File:Aantekeningen-2.jpg]]<br>
 +
<br>
 +
[[File:Aantekeningen-3.jpg]]<br>
 +
<br>
 +
[[File:Aantekeningen-4.jpg]]<br>
 +
<br>
 +
[[File:Gear-lasercut-1.jpg]]<br>
 +
<br>
 +
[[File:Gear-Fail-1.jpg]]<br>
 +
<br>
 +
[[File:Gear-fail-2.jpg]]<br>
 +
<br>
 +
[[File:Gear-lasercut-2.jpg]]<br>
 +
<br>
 +
<br>
 +
Plan B: Prototype small<br>
 +
So, this new idea was using just two gears. One gear where the record lays on top and another gear you need to turn by hand to make the record on the other gear turn. I’ve analysed the new design with a good friend of mine who has used the laser cutter quite often before. We came to the conclusion that I’ve had to avoid friction of the wood by placing a ring around the spindle and bolt. I’ve also had to make a little handle for one gear and I’ve had to measure the diameter of the spindle of a record player. With this in mind, I’ve build a small prototype. <br>
 +
[[File:Aantekeningen-5.jpg]]<br>
 +
<br>
 +
[[File:Aantekeningen-6.jpg]]<br>
 +
<br>
 +
[[File:Aantekeningen-7.jpg]]<br>
 +
<br>
 +
[[File:Test-gear-2.jpg]]<br>
 +
<br>
 +
[[File:Gear-lasercut-3.jpg]]<br>
 +
<br>
 +
[[File:Gear-lasercut-4.jpg]]<br>
 +
<br>
 +
<br>
 +
Plan C: Prototype big<br>
 +
The smaller version was a success, it even looked like a turntable for a DJ. My next step was to make the actual thing. I’ve done some preparations like cutting my own pieces of wood at the Wood Workshop and making a reservation at the laser cutter. I’ve created a new design in Illustrator for the laser cutter and I went for it. <br>
 +
[[File:Blauwdruk-80x45-p1.jpg]]<br>
 +
<br>
 +
[[File:Blauwdruk-80x45-p2.jpg]]<br>
 +
<br>
 +
[[File:Proces-1.jpg]]<br>
 +
<br>
 +
[[File:Proces-2.jpg]]<br>
 +
<br>
 +
[[File:Proces-3.jpg]]<br>
 +
One of the hardest bits of making the wooden gramophone was making the centre spindle. The diameter of a spindle on a record player is 0,71 cm. This meant I’ve had to use the technique woodturning to carve out the spindle by hand. It took some time but eventually, I’ve made a spindle on my first try. <br>
 +
<br>
 +
[[File:Proces-4.jpg]]<br>
 +
<br>
 +
[[File:Proces-5.jpg]]<br>
 +
<br>
 +
[[File:Proces-6.jpg]]<br>
 +
<br>
 +
[[File:Proces-7.jpg]]<br>
 +
<br>
 +
[[File:Proces-8.jpg]]<br>
 +
<br>
 +
[[File:Proces-9.jpg]]<br>
 +
<br>
 +
[[File:Proces-10.jpg]]<br>
 +
Instead of using some rings to avoid friction, I’ve used two weights of an old fidget spinner. This turned out to be even more effective. Now it’s easy to turn the gear.<br>
 +
<br>
 +
[[File:Proces-11.jpg]]<br>
 +
<br>
 +
<br>
 +
Plan D: Cone<br>
 +
So for the cone I've used different kinds of material. Golden cardboard, thin black transparant paper and paper for drawing. I've also used the needle of a button and I've used the regular stitching needle. I've discovered that drawing paper with a thickness of 120 grams is perfect for the cone. It is a bit stronger than printing paper and it guides the vibrations very well. And it's loud. Really, really loud. <br>
 +
[[File:Proces-12.jpg]]<br>
 +
<br>
 +
[[File:Proces-13.jpg]]<br>
 +
<br>
 +
[[File:Proces-14.jpg]]<br>
 +
<br>
 +
[[File:Proces-15.jpg]]<br>
 +
<br>
 +
[[File:Proces-16.jpg]]<br>
 +
I've added some rubber so the record would slide around when you turn it.
 +
<br>
 +
[[File:Proces-17.jpg]]<br>
 +
<br>
 +
<br>
 +
<br>
 +
[[File:Final-piece.jpg]]<br>
 +
<br>
 +
This is the final piece of my analogue gramophone. You can find the Instructable here: www.instructables.com/id/Analog-Gramophone-for-Teaching/ <br>
 +
<br>
 +
 
 +
 
 +
= '''Presentation and reflection''' =
 +
I’ve made an analogue gramophone from wood with a DIY instruction for teaching. I wanted to let people re-experience music. Nowadays we’re used to know music as a digital piece. It’s on your phone, cd, computer etc. It also can be a file like mp3 or wav. But actually, they are vibrations and this gramophone shows you (again) that the sound is coming from the groves of a record. It’s not something digital.<br>
 +
<br>
 +
It’s hard to think about something that I missed during this practice. First, I thought about the lack of a connection between my major (Teacher Training) and the practice. But it was probably up to me to make this connection. And because of the freedom during this practice, I’ve got the option to make a project for myself or for my major so this wasn’t actually a bad thing.<br>
 +
I believe I would like to have a few guests at our lessons telling stories about their projects. We’ve got lots of useful information for our projects from you but I believe it would be refreshing if we’ve had sometimes some new people in front of us. After a few weeks, I’m getting used to the same way of listening to lectures and it becomes a bit repetitive. I also think it would be useful if these guests can visit during the lessons. Because I couldn’t visit a lot of the workshops you’ve organised. This was because of my internship which asked a lot of my time. <br>
 +
<br>
 +
There are a few topics I wish to further explore. One of these topics is the cone of my gramophone. The cone is made of paper (120 grams) and there is a stitching needle attached to it. The paper is great, it produces the loudest and clearest sound. But I believe it can become better quality if I would explore it further. Also, the stitching needle will destroy eventually the record. Maybe I can experiment with a needle for a record player or maybe I don’t need one at all. It would be great if you can safely use the record. Maybe I can avoid the destruction of the record by making a stand for the cone.<br>
 +
I also think I could experiment a bit more with the size of the gramophone. Because now it’s very big and very annoying to take it home or maybe to different classes.<br>
 +
Another one of these topics has a better connection with my major. I’m talking about the black box exercise. Because with this exercise you’re questioning your knowledge. Sure, almost everyone can explain to you how you need to play a record on a record player but does everyone actually know how it works? How well do you know your technology/craftsmanship/skills/surroundings etc.? I think it’s very important to be aware of these things, because why would you listen to someone who doesn’t fully understand what he is doing or talking about? I wouldn’t.<br>
 +
<br>
 +
For this exercise, I mainly used wood and paper. If I want to continue with this project I could explore with metal for the cone. Thick, thin, different kinds of metal. But the first thing I probably will do is try to make a fold in the paper cone. Maybe the sharp edge of the paper can work as a needle and with this I can’t destroy the record. <br>
 +
Another option is working with a 3d printer, because the size of the gramophone was also an issue. It might be possible to create parts and pieces so you can easily take it with you. Perhaps it might come in different fancy colours.<br>
 +
A third option might be buying an actual record player and disassemble it. Then I could try to make an analogue version of it. One of the big advantage is that there is a tone arm already attached to the machine. Then I only need to find a way to amplify the sound.<br>
 +
<br>
 +
I think the main research question will be: How can I get a clearer sound out of the cone? With this question, I would probably solve flaws like destroying the record, working with different material for the cone, making a stand for the cone etc.<br>
 
<br>
 
<br>
After discovering this, I wondered if I could make my own record player with cheap material. So, I’ve found this poor quality video where someone uses a paper cone, tape and a very small needle to “hear” the sound on the record. I’ve tried to do the same, expecting this wouldn’t work. But it did work and it makes sense. The vibrations go through the cone and it amplifies the sound. If you shout through the cone, your voice will be amplified. Basically, I’ve recreated the Phonograph but with paper and you’ve had to turn the record by hand.<br>
+
[[File:Presentatie.jpg]]<br>
 
<br>
 
<br>
 +
Lastly, I learned during this practice that when I'm about to craft something, I just need to start doing it. With the outcomes, I can make better conclusions than sitting behind a desk thinking and thinking what would work.

Latest revision as of 14:24, 5 January 2019

Digital craft 3rd year practice

Marley.jpg

Rens van der Heijden
Fine Art and Teacher Training
0927125

Written Assignment

My name is Rens van der Heijden and I am a student from the Teacher Training (third year). Not only am I learning to become a teacher for art and design, I am also working with different kinds of tools and materials to produce artwork. Basically, all kind of tools and media because I want to extend my knowledge. I think this is very important if I’m going to become a teacher of art and design.

When I’m about to craft something, I usually focus and work too much. On one hand this is a good thing, because every time I’m giving it my all. I’m trying to make the best out of it. But on the other hand, working like this causes me to get frustrated. Because after some time working on a project, I get exhausted.
The best way to work for me is when I have to make/craft something and my components/tools/materials/software to make or craft are within reach. Somehow making and crafting feel more natural to me than writing an assignment for instance.
I also sometimes work with very few tools (on purpose) and a problem-solving method. Working on projects with very few tools causes me to get stuck very quick. Because of this, I’m challenging myself to test the tools it’s limits. What is my problem and what can I do with the tools I have? What other functions do my tools have? By doing this, I need to come up with creative ways to produce artwork.

I think my main tool of my craft is drawing/painting with pen. Most of the time I drew with a pen in a little notebook and I used a drawing tablet and Adobe Photoshop to create paintings. But in the past years, I use tools like camera’s (filming and taking pictures), Virtual Reality, 3D objects and interventions. And now you might wonder? Well right now, I’m going back to my roots, which is drawing on paper. But this time I’m going to use charcoal to draw portraits.
I was always drawing as a kid. If there was paper and a pencil, I would draw. This passion has been growing until my third year at Grafisch Lyceum Rotterdam (which was 4 years ago). Between then and now I didn’t feel like drawing anymore. I still don’t know why. The passion, this flame, was gone. It had been gone for 4 years until a few months ago. Somehow the passion to draw came back. Not as big as usual, but it is back. And that is the most important thing for me.

33020532 1533236303469971 5525330956489064448 o.jpg

42342569 1702179083242358 1271700203862228992 o.jpg

I choose this practice because of several reasons. This practice was more appealing to me compared to the other practices, where to me you’re almost forced to be some kind of activist.
I think Arduino and my record player where the most interesting things that have arisen during this Practice. Arduino really got my attention after the workshop, because I looked some stuff up about what you can make with Arduino. One of these things was making a real electric drum kit made of a plastic drum kit for a videogame.
The record player really surprised me because it let me experience sound in a different way. It really felt like magic. I somehow forgot that noises are actually vibrations.

I actually don’t have a big history with the gramophone/record player. When my father was my age, he used to work in a record store. He loves music so he collected a lot of records during that time. When I was a kid, I sometimes searched for those records and just looked at the design of the covers. I couldn’t play the records because my father’s record player was broken. And with the rise newer technology like cd’s, the record player was forgotten for a while. But a few years ago, my father decided to repair it so he could play his old records. Now I’ve bought some records myself and I am using it more often than him.

There is a specific person I rediscovered during this practice. I’m talking about Jack White. A musician, who’s also known as the Willy Wonka of music because he has crazy projects where he is pushing boundaries. For instance, he is the first person who played a vinyl record in space using a “space proof” turntable attached to a high-altitude balloon.
He has also a very interesting opinion about records and record players. To him buying a record and listening to it is the same as going to the cinema to watch a brand-new film. You can listen to music by telephone or computer, but the record is a physical thing you can touch, you can smell etc. And when you want to make a record of something on vinyl, you need to do it in one take. If you make a mistake, you can hear it on the record. This is very hard for musicians. But to Jack White this is the best part about music. The mistakes make the music real.

One thing I need to remember is the sentence on the building of Blaak: “I have to change to stay the same”. I think this is a very important lesson for every teacher who is standing in front of a class. Our world is changing and so is technology. That’s why I think it’s important to teach students about newer technologies instead of older ones. I think they might find older technology very boring because of its age. I also believe they might find it useless because the old technology is replaced with newer ones.
I also hope to learn during this Practice newer technologies for creative, activating and exciting lessons. Because I noticed during my internship that I find it difficult to create lessons for my class. It always becomes a traditional lesson. For instance, I’m standing in front of the class and I’m transferring information by talking instead of students trying to discover it by themselves out of curiosity.
I think lessons will be more interesting with technology if I demonstrate something. For instance, my record and the paper cone. Or the crazy and weird experiments you get at your science lessons. I also think that DIY kits are also great. You are learning by doing and making it by yourself. I think it would be even better if it is a puzzle. Because puzzles are fun to do, and when something is fun to do, it’s easier to remember.

Project 1: Critical Making exercise

For this exercise, I’ve teamed up with 3 other students. Bart from the Teacher Training, Joep from Graphic Design and Mike from Autonomous. Together we’ve chose the following cards: “Clickbait or Listicles”, “Highlight a boring future that could result from” and “Use folded paper to create a physical model of this new thing”.

We went on the internet to Marktplaats and from there we used clickbaits to navigate through the internet. For instance, we saw a suspicious advert on Marktplaats. Once we clicked on this, we went to a different kind of web shop with ridiculous expensive products. From there we saw another advert which guided us to another site where we would find other adverts or articles which guided us to again another site etc.

We’ve made screenshots of our steps but unfortunately, we’ve lost a big part of it. However, we’ve made a short video with the remaining screenshots to show how annoying clickbaits are. During our presentation we showed this video and threw the printed screenshots to the audience, trying to let them ask themselves: Aren’t we already being guided by clickbaits through the internet? We should be careful when we encounter clickbaits.


Project 2: Cybernetic Prosthetics

Shred, melt, print. That's what our machine would do. We were given the assignment to make the concept for a bio-machine. A machine which had something to do with bio, biological, biology, bio industry, whatever.

The concept we developed is a composed machine consisting of three actual machines. A "shredder", a "melter" and a 3d printer. The shredder is meant for shredding plastic waste, that shredded waste will be melted to a new 3d printer filament, this filament can be used to print again. So in the end, you’ll have three small DIY kits to recycle plastic and to provide yourself new useful tools.

For now we mainly focused on the shredder and did some research to the possibilities that, gives, with the goal to print a shredder from wasted plastic which will create a loop again. We’ve discovered that there are different types of plastic: PET, HDPE, PVC, LDPE, PP, PS, MIX. We’ve also found a schedule with the melting temperatures of these types. However, this shredder is originally designed for PET (polyethylene terephthalate).

We’ve made this wooden prototype specially to analyse its size. We’ve discovered that a part of the handle is too big. Because of this, we couldn’t rotate it, and the machine did not work.

Blauwdruk-laser-cutter.jpg
File we used for the Laser Cutter

Prototype.jpg Prototype of the Shredder

Project 3: From Devices to systems

After Project 2, I’ve worked alone on the upcoming projects. For the From Devices to systems project, I choose the record and the record player. It was a device which was such a mystery for me. I didn’t understand how information (in this case music) could be carved in records. And how do those carvings transform into music when we use a record player?

Well in order to answer these questions better we need to take a closer look at the record:

Close-up-record-1.jpg

Close-up-Reccord-2.jpg

This is a close up of the carvings. When you put a record on the record player, the needle (which is attached to the arm) will sit in the carving. The needle makes contact with the sides of the carvings, which causes the needle to vibrate. These vibrations go through the arm to a magnet system. Then the vibrations go twice through an amplifier which amplifies the sound. Finally, the vibration comes out through the big speakers. And we hear these vibrations as music.

After discovering this, I wondered if I could make my own record player with cheap material. So, I’ve found this video (www.youtube.com/watch?v=6FX4E2GHkWY) where someone uses a paper cone, tape and a very small needle to “hear” the sound on the record. I’ve tried to do the same, expecting this wouldn’t work. But it did work and it makes sense. The vibrations go through the cone and it amplifies the sound. If you shout through the cone, your voice will be amplified. Basically, I’ve recreated the Phonograph but with paper and you’ve had to turn the record by hand.

Schermafbeelding 2019-01-05 om 15.39.44.png This is me and a classmate of mine trying to to play the record with a paper cone and a needle. Someone else filmed us. Unfortunately, I don't know to upload this video on the wiki

Project 4: Cartography of Complex Systems & the Anthropocene

Mindmapping.jpg

In this project, I did more research about the gramophone. I want to know how it’s possible to hear sound/music from the grooves of a piece of plastic. I also want to discover how they made them and how they changed form throughout the years. We start with the very first device for recording and replaying sound.


Phonograph
The phonograph (as a trademark since 1887 known as the gramophone) was a device for the mechanical recording and reproduction of sound. This device was invented by Thomas Edison in 1877. Below is a picture of the anatomy of the phonograph of Edison.

Edisons speelgoed.gif

His phonograph originally recorded sound onto a tinfoil sheet wrapped around the cylinder. This will rotate when you turn the hand crank. A stylus responding to sound vibrations produced an up and down groove in the foil. Around 1899, the cylinder changed to a wax-coated version.


Edisons speelgoed deel 2.png
This is a side view of the phonograph. If you want to record sound, you speak into the tube (1). The sound from your voice makes a diaphragm (like a drumhead/drumskin) vibrate, pushing a needle (2) back and forth. The needle is cutting a groove into the cylinder (3), which is slowly turned by a clockwork motor. Another needle (4) presses into the groove, bouncing up and down in the pattern previously cut there. Another diaphragm and horn (5) amplify the sounds and turn them back into sounds we can hear.

But Edison wasn’t the only one. Before him there where already predecessors working on something similar. And even after Edisons invention someone else made an “improved” version of his phonograph. Emile Berliner made a gramophone, similar looking like the phonograph but without wax cylinder. Berliner used discs which could be played with a small hand propelled machine. This became the predecessor of the record player.

Berliner disc recordd gramophone.jpg



Record player
As we can see the record player looks similar to the gramophone of Berliner. Record players became extremely popular in the 60s and 70s when Dual released the first turntables to provide stereo playback. High-fidelity sound reproduction hit the scene and motivated countless people to add a record player in their home. The automatic high-fidelity turntable was an immediate hit in the early 60s.

It also works similar like the phonograph. The stylus or needle attached to the tone arm is pressing into the groove and also bouncing up and down. Only this time, the vibrations are going through different amplifiers which amplify the sound. And you can even decide if you want it louder or softer.

Turntable-Anatomy.jpg



CD and digital
After a few years, the Compact Disc, or CD, unofficially arrived with the release of the Dire Straits’ Brothers in Arms album, which was recorded on the latest digital equipment and spawned a tour sponsored by Philips. The album became a musical mainstay, which resulted vinyl fans and audiophiles to purchase CD players in droves to adopt the growing format. CD sales overtook the vinyl in 1988 and in 1991 it overtook the cassette.

During time, the CD became bigger and better. People could now buy a CD-RW (Compact Disc-ReWritable). It allowed people to put hundreds of songs form a friend’s hard drive onto discs which could be played in newer CD players and it could be shared with each other. This also caused the downfall of the CD. Napster, a website around 1999, allowed global users to easily share music files with 80 million users. Why buy something if you can download it on Napster? Eventually the website was shut down in 2001 and in the same year, Steve Jobs presented the MP3 player. With this, the sales of the CD began to slowly fade away.



Vinyl revival
Around the early 2010s, the vinyl made a comeback. It was growing at a very fast rate. In some territories, it became even more popular since late 1980s. I believe the revival of the vinyl is a part of a greater revival of retro style. Jack White, a successful musician has even started his own record company because it fascinates him so much. To him buying a record is going to the cinema for a movie.

Global Vinyl Sales Graph In US$.png UK Vinyl Sales Graph In £.png

3rd Year Final Product

My final product for this practice was an analogue gramophone with an Instructable. The Instructable, written by me, is a tutorial which shows how to build your own analogue gramophone. I want to let people re-experience music/sound.

The project has a connection with my major (teacher training). This device and the Instructable are great tools for a teacher to teach by demonstrating. But you can also let students discover it on their own. You give them the tools they need and let them try to use them. That’s also one of the main reasons why I’ve made an analogue version of it. I didn’t want it to be a “push-a-button-and-watch” machine. I want the viewer to be fully in control of the record player. He/she places the record on the gear, he/she turns the record, he/she holds the cone etc. I believe it will make the result more magical because you are the one that’s controlling the machine.

This is the process of the analogue gramophone:


Plan A: Gear testing
First, I’ve wanted to make some kind of box with the record on top of it and a turning gear on the side. I looked back at the plastic grinder I’ve made before during this practice. I knew the hardest part about this design would be the gears. So, after some notes and a few sketches, I’ve made a few prototypes. And it was a disaster. It didn’t work.
But, when I was waiting for the laser cutter, I’ve accidently came up with a better design for the gramophone.
<br.> Aantekeningen-1.jpg

Aantekeningen-2.jpg

Aantekeningen-3.jpg

Aantekeningen-4.jpg

Gear-lasercut-1.jpg

Gear-Fail-1.jpg

Gear-fail-2.jpg

Gear-lasercut-2.jpg


Plan B: Prototype small
So, this new idea was using just two gears. One gear where the record lays on top and another gear you need to turn by hand to make the record on the other gear turn. I’ve analysed the new design with a good friend of mine who has used the laser cutter quite often before. We came to the conclusion that I’ve had to avoid friction of the wood by placing a ring around the spindle and bolt. I’ve also had to make a little handle for one gear and I’ve had to measure the diameter of the spindle of a record player. With this in mind, I’ve build a small prototype.
Aantekeningen-5.jpg

Aantekeningen-6.jpg

Aantekeningen-7.jpg

Test-gear-2.jpg

Gear-lasercut-3.jpg

Gear-lasercut-4.jpg


Plan C: Prototype big
The smaller version was a success, it even looked like a turntable for a DJ. My next step was to make the actual thing. I’ve done some preparations like cutting my own pieces of wood at the Wood Workshop and making a reservation at the laser cutter. I’ve created a new design in Illustrator for the laser cutter and I went for it.
Blauwdruk-80x45-p1.jpg

Blauwdruk-80x45-p2.jpg

Proces-1.jpg

Proces-2.jpg

Proces-3.jpg
One of the hardest bits of making the wooden gramophone was making the centre spindle. The diameter of a spindle on a record player is 0,71 cm. This meant I’ve had to use the technique woodturning to carve out the spindle by hand. It took some time but eventually, I’ve made a spindle on my first try.

Proces-4.jpg

Proces-5.jpg

Proces-6.jpg

Proces-7.jpg

Proces-8.jpg

Proces-9.jpg

Proces-10.jpg
Instead of using some rings to avoid friction, I’ve used two weights of an old fidget spinner. This turned out to be even more effective. Now it’s easy to turn the gear.

Proces-11.jpg


Plan D: Cone
So for the cone I've used different kinds of material. Golden cardboard, thin black transparant paper and paper for drawing. I've also used the needle of a button and I've used the regular stitching needle. I've discovered that drawing paper with a thickness of 120 grams is perfect for the cone. It is a bit stronger than printing paper and it guides the vibrations very well. And it's loud. Really, really loud.
Proces-12.jpg

Proces-13.jpg

Proces-14.jpg

Proces-15.jpg

Proces-16.jpg
I've added some rubber so the record would slide around when you turn it.
Proces-17.jpg



Final-piece.jpg

This is the final piece of my analogue gramophone. You can find the Instructable here: www.instructables.com/id/Analog-Gramophone-for-Teaching/


Presentation and reflection

I’ve made an analogue gramophone from wood with a DIY instruction for teaching. I wanted to let people re-experience music. Nowadays we’re used to know music as a digital piece. It’s on your phone, cd, computer etc. It also can be a file like mp3 or wav. But actually, they are vibrations and this gramophone shows you (again) that the sound is coming from the groves of a record. It’s not something digital.

It’s hard to think about something that I missed during this practice. First, I thought about the lack of a connection between my major (Teacher Training) and the practice. But it was probably up to me to make this connection. And because of the freedom during this practice, I’ve got the option to make a project for myself or for my major so this wasn’t actually a bad thing.
I believe I would like to have a few guests at our lessons telling stories about their projects. We’ve got lots of useful information for our projects from you but I believe it would be refreshing if we’ve had sometimes some new people in front of us. After a few weeks, I’m getting used to the same way of listening to lectures and it becomes a bit repetitive. I also think it would be useful if these guests can visit during the lessons. Because I couldn’t visit a lot of the workshops you’ve organised. This was because of my internship which asked a lot of my time.

There are a few topics I wish to further explore. One of these topics is the cone of my gramophone. The cone is made of paper (120 grams) and there is a stitching needle attached to it. The paper is great, it produces the loudest and clearest sound. But I believe it can become better quality if I would explore it further. Also, the stitching needle will destroy eventually the record. Maybe I can experiment with a needle for a record player or maybe I don’t need one at all. It would be great if you can safely use the record. Maybe I can avoid the destruction of the record by making a stand for the cone.
I also think I could experiment a bit more with the size of the gramophone. Because now it’s very big and very annoying to take it home or maybe to different classes.
Another one of these topics has a better connection with my major. I’m talking about the black box exercise. Because with this exercise you’re questioning your knowledge. Sure, almost everyone can explain to you how you need to play a record on a record player but does everyone actually know how it works? How well do you know your technology/craftsmanship/skills/surroundings etc.? I think it’s very important to be aware of these things, because why would you listen to someone who doesn’t fully understand what he is doing or talking about? I wouldn’t.

For this exercise, I mainly used wood and paper. If I want to continue with this project I could explore with metal for the cone. Thick, thin, different kinds of metal. But the first thing I probably will do is try to make a fold in the paper cone. Maybe the sharp edge of the paper can work as a needle and with this I can’t destroy the record.
Another option is working with a 3d printer, because the size of the gramophone was also an issue. It might be possible to create parts and pieces so you can easily take it with you. Perhaps it might come in different fancy colours.
A third option might be buying an actual record player and disassemble it. Then I could try to make an analogue version of it. One of the big advantage is that there is a tone arm already attached to the machine. Then I only need to find a way to amplify the sound.

I think the main research question will be: How can I get a clearer sound out of the cone? With this question, I would probably solve flaws like destroying the record, working with different material for the cone, making a stand for the cone etc.

Presentatie.jpg

Lastly, I learned during this practice that when I'm about to craft something, I just need to start doing it. With the outcomes, I can make better conclusions than sitting behind a desk thinking and thinking what would work.