Difference between revisions of "User:Sneha Arvind"

From DigitalCraft_Wiki
Jump to navigation Jump to search
Line 56: Line 56:
  
 
==Personal Project==
 
==Personal Project==
 +
 +
Kinetic scuptures have intrigued me for the longest of time. So, this project I decided to decode a popular kinetic sculpture, The Swinging Stick Pendulum.
 +
I started off by learning how to use a breadboard and how to light a SIMPLE LED light.
 +
 +
'''principle'''
 +
a magnet is fixed on one of the ends of the second member and is repelled by the electromagnet due to dissimilar polarity. the weights are perfectly balanced so acs to give a counter weight every time it moves to one direction.
 +
 +
'''My experiments'''
 +
 +
I also hadtomake my own electromagnetic coil with a 1000 turns.
 +
 +
[[File:11.jpg]]
 +
[[File:22.jpg]]
 +
[[File:33.jpg]]
 +
[[File:44.jpg]]
 +
[[File:55.jpg]]
 +
[[File:66.jpg]]
 +
[[File:77.jpg]]

Revision as of 07:03, 22 June 2017

Hello! Welcome to my page!

Name : Sneha Arvind Email : 0941442@hr.nl

Department - Spatial Design \ Q8

Sneha Arvind


Group Exercise

Group Members - Sneha Arvind Shipra Balasubramani Mirdu Jhangiani Niko Arranz Aayushi Katare

In this exercise, each group had to present a concept learnt on that day in a creative way with an aim to break it down for students to understand. Our group presented the influence of a 'resistor' on the working of a circuit. In the absence of the resistor, the bulb of the circuit fuses due to excess current flowing through the circuit. The excess current results in heating. In the presence of the resistor, current is regulated thus making the bulb glow. The other elements of the circuit include Shipra as the resistor, Aayushi as the key, Niko as the battery, Mridu as the electrons in motion and myself, Sneha as the bulb.

Shipra / Resistor
Aayushi / Switch
Mridu / Electrons
Niko / Battery

And sadly, I do not have a photo of myself (the bulb).

LABS

Lab 1

In this lab, we learnt how to measure and record CURRENT, RESISTANCE and VOlTAGE. In addition, some other topics covered included 'Effect on voltage and current in series and parallel arrangements' and 'learning how to use a breadboard'.

As I was on a class trip to Copenhagen on this day, I could not attend this lab. However, I learnt how to use a breadboard on my own and used it for my individual project. (Refer to 'Process' pictures) I have been exposed to the other basics taught in high school.

Lab2

Principle - The voltage at the different resistors gets converted to sound

Schematic Diagram

Process

1. Etch the schematic diagram onto the copper plate. For this, I printed the schematic diagram onto the copper place first and then dipped it in acid to get etched.Time duration included 1 1/2 hours.

2. Once our schematic drawing was etched on the copper plate. Schematic 1 diagram was followed to fix the components of the circuit. This was a rather intricate process considering the size of the components and my skill(first timer).

Result

The sound produced by the board was different. The gradation in sound was absent. The sound produced would play if you place your finger on the touchpad and would pause if any of the other touch pads on the circuit were touched. The outcome was 'reversed'.

I tried uploading a video of it didn't work. To see a video of my circuit, please visit my Youtube Channel 'Sneha Arvind'. Thanks!

Personal Project

Kinetic scuptures have intrigued me for the longest of time. So, this project I decided to decode a popular kinetic sculpture, The Swinging Stick Pendulum. I started off by learning how to use a breadboard and how to light a SIMPLE LED light.

principle a magnet is fixed on one of the ends of the second member and is repelled by the electromagnet due to dissimilar polarity. the weights are perfectly balanced so acs to give a counter weight every time it moves to one direction.

My experiments

I also hadtomake my own electromagnetic coil with a 1000 turns.

11.jpg 22.jpg 33.jpg File:44.jpg 55.jpg File:66.jpg File:77.jpg