MIMAKI

From Publication Station


Mimaki, flatbed UV printer for materials such as wood, perspex etc. (no fabric).

Always 1 page in the file!! TIFF or PDF/x a:2001

Enter and open a USB stick from Rasterlink 6.

• File size must match the substrate, otherwise the mimaki table will be printed (not intended).

• If larger than A3 and portrait: rotate file in Rasterlink.

• The zero point is at the bottom right of the table. In the table there is a corner about 4 cm away. The object to be printed must be placed in this corner.

For simple full color printing: click on printer symbol in Rasterlink and choose Rip and Print. Check if mimaki is on Local. If the vacuum starts, press REMOTE. When print is finished, turn off the vacuum again.

White printing only

Make a file where everything that needs to be white is black in the document. In Rasterlink, choose the "star goes to star" symbol. Choose "valid pixel", choose "white" and enter 100% twice. Do not attach to file, otherwise it will be printed in black. Select and print a new "white" document. For more accurate white, it is more convenient to create a separate white print run in Illustrator or Photoshop. Make everything that will be printed with white ink in black!


White background + full colour

In Rasterlink, choose the "star goes to star" symbol. Choose "valid pixel" or the entire surface (then complete file format is printed in white). Now you can link, so that the white and full color are printed at the same time.


White background + full colour on transparent

If desired, put image in mirror image. In this case, CMYK must first be printed and then the white. Do NOT link files.


Primer and Gloss

This is done in the same way as WHITE, but you can only link 2 printing runs at a time. Each printing run per A4 costs 1 euro.


DUTCH


Mimaki, vlakbed UV printer voor materialen zoals hout, perspex etc. (géén stof).



Altijd 1 pagina in het bestand!!!

TIFF of PDF/x a:2001

• USB stick invoeren en openen vanuit Rasterlink 6.

• Formaat bestand moet overeenkomen met het substraat, anders wordt er op de mimaki tafel geprint (niet de bedoeling).

• Indien groter dan A3 en staand: bestand roteren in Rasterlink.

• Het nulpunt ligt rechtsonder op de tafel. In de tafel zit een hoekje op ongeveer 4 cm afstand. In deze hoek moet het te beprinten voorwerp komen te liggen.


Bij eenvoudige full colour druk: klink op printer symbool in Rasterlink en kies voor Rip en Print. Check of mimaki op Local staat. Als de vacuum aanslaat op REMOTE drukken. Als print klaar is, de vacuum weer uitzetten.


Alleen wit printen

Bestand aanleveren waarbij alles dat wit moet worden zwart in het document is. Kies in Rasterlink het “ster gaat naar ster” symbool. Kies voor “valid pixel”, kies “white” en vul twee keer 85% in. Niet aan bestand koppelen, anders wordt het zwart meegeprint. Nieuwe “witte” document selecteren en printen. Voor nauwkeuriger wit is het handiger om een aparte witte drukgang aan te maken in Illustrator of Photoshop. Maak alles wat met witte inkt gedrukt gaat worden, op in zwart!


Witte ondergrond + full colour

Kies in Rasterlink het “ster gaat naar ster” symbool. Kies voor “valid pixel” of het gehele oppervlak (dan wordt complete bestandformaat geprint in wit). Nu kun je wel koppelen, zodat het wit en full colour tegelijkertijd geprint wordt.


Witte ondergrond + full colour op transparant

Zet desgewenst beeld in spiegelbeeld. In dit geval moet eerst CMYK geprint worden en daarna het wit. Bestanden dan NIET koppelen.

Primer en Gloss Dit gaat op dezelfde manier als WIT, maar je kunt maar 2 drukgangen tegelijk koppelen.


Elke drukgang per A4 kost 1 euro.