Print Studio/screen printing

From Publication Station
Revision as of 12:20, 1 September 2023 by Kinga (talk | contribs) (Created page with "== SCREEN PRINTING PREPARATIONS == When making a double-sided print ask yourself these questions and follow the instructions! === Before screen printing you need to digitally print your design on a transparent plastic sheet/ translucent tracing paper. You can do this in two sizes in A3 and A4, these can be found in drawers number 4-5 (A3) and 16-17 (A4). Remember the number of the drawer that you took your sheets from! === <br> File:Drawers.jpg <br> === After Air...")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)

SCREEN PRINTING PREPARATIONS

When making a double-sided print ask yourself these questions and follow the instructions!

Before screen printing you need to digitally print your design on a transparent plastic sheet/ translucent tracing paper. You can do this in two sizes in A3 and A4, these can be found in drawers number 4-5 (A3) and 16-17 (A4). Remember the number of the drawer that you took your sheets from!


Drawers.jpg

After Airdropping your file to the computer (eps…PrintR or eps…PrintL) you can approach by opening the Fiery Command WorkStation. (the red and white lightning icon) Within the WorkStation drop you file to the Held folder.


Fiery.png
Held folder.jpg

Double click on the file. This will open the Job Properties of the file and you can click on Quick Access to find all the settings that you will need for the following steps.


Quick access.jpg

Open the Paper Catalogue and look for the same number that the drawer you took your paper from had too. (4-5, 16-17)


Paper catalogue.jpg

Press print and go to the Printer.


Put your paper in the machine.


Paper handling.jpg

The printer will ask you to set your choice of paper. Press change and look for the same number again. (4-5, 16-17)


Change.jpg
Paper.jpg
Paper paper.jpg

Press OK and OK again. Your prints are now being processed.


Ok.jpg
Ok ok .jpg