Print a Booklet with the Canon

From Publication Station
Revision as of 13:39, 14 September 2023 by Maytals (talk | contribs)

Upload your file

Transfer your files to the computers next to the Cannon printer: drag them from Downloads to the HELD section of the printing software. Double-click the file to open job properties.
Downloads.png

Choose a preset

1. Select one of the existing presets, based on your page size and your paper choice.
explanation: your paper size is your page width x2 (=a spread).
for example, if your booklet has a page size of A5 or smaller = your preset is an A4 Booklet.
if your page size is A4 or smaller = your preset is an A3 Booklet.
0 BookletPrinting Presets.png

Control paper size and type

On the left-side menu select: Quick Access.
1. Check your Output Paper Size - see that it matches your spread size, as defined in the preset.
2. Check your paper in the Paper Catalogue.
- If you are printing on your own paper, change the Media Type to choose the right paper weight.
2 BookletPrinting PaperCat.png
3. select from the 2-sided Printing options: Long Edge means the page flips 2B BookletPrinting 2side.png

Define Booklet Structure

On the left-side menu select: Layout.
1. select from the small menu "booklet" and click OK.
3 BookletPrinting OK.png
2. Select Booklet Type.
- use Saddle for a booklet with 1 signature (max 24 pages)
- use Nested Saddle for multiple signatures - use Perfect for Japanese binding
4 BookletPrinting BType.png
3. Under "Paper Size" make sure you select the same output Paper Size as you did before.
Please note: "shrink to fit" is set on as default. To maintain your original design size click it out.


Cover

It is most recommended to print the cover as a separate file. However, for zines and small booklets it is also possible to have the cover printed together with the internal pages.

Under 'Cover' select "Define Cover".
if you are printing the cover without the intern pages: Choose the paper for the cover under "Media" - use the same paper as for the intern pages.
if you are printing the cover with the intern pages: Choose the paper for the cover under "Media". If you are using your own paper choose the multipurpose tray.

8 BookletPrinting DefineCover.png

Staple Option

If you want your booklet to be directly folded and staples you can do it the following way.
please note: the Maximus pages for this depends on your paper thickness. Max for 120gr paper is 32 pages.

1. Go to Finishing and scroll down to see the Stapler Mode Finishing.png
2. Select Saddle Stitch in the Stapler Mode Fnishing2.png

Multiple Signatures

When designing a book with many pages, it is handy to have multiple signatures. An ideal signature combines 4-5 sheets of paper (16-20 pages). you can define the division of your signatures under "Finishing".