Difference between revisions of "Quickstartguide:Bookbinder"

From Publication Station
Jump to navigation Jump to search
(Created page with "To bind a book using the glue book binding machine you will need to have your pages loose '''(b)''', and your cover '''(a)''' prepared as a spread. File:Bookbinder-pages.pn...")
 
 
Line 1: Line 1:
 
To bind a book using the glue book binding machine you will need to have your pages loose '''(b)''', and your cover '''(a)''' prepared as a spread.
 
To bind a book using the glue book binding machine you will need to have your pages loose '''(b)''', and your cover '''(a)''' prepared as a spread.
  
[[File:Bookbinder-pages.png]]
+
[[File:Bookbinder-pages.png | 400px]]
  
 
* Wait until the machine heat is 155 degrees
 
* Wait until the machine heat is 155 degrees
Line 7: Line 7:
 
* Place your cover sheet on the right hand side
 
* Place your cover sheet on the right hand side
 
* Line up the center of your cover with the red arrow
 
* Line up the center of your cover with the red arrow
[[File:Bookbinder-coverandcontents.png]]
+
[[File:Bookbinder-coverandcontents.png | 600px]]
  
 
* Tighten the clamp until it will not tighten any further by pressing the button illustrated below
 
* Tighten the clamp until it will not tighten any further by pressing the button illustrated below
[[File:Bookbinder-clamp-button.png]]
+
[[File:Bookbinder-clamp-button.png | 400px]]
  
 
* Press the green button on the front
 
* Press the green button on the front
[[File:Bookbinder-green-button.png]]
+
[[File:Bookbinder-green-button.png | 400px]]
  
 
* Support the contents with your hand while the cover is attached to the content pages
 
* Support the contents with your hand while the cover is attached to the content pages
 
* Let the binding and cover clamp to fully disengage before you remove your booklet
 
* Let the binding and cover clamp to fully disengage before you remove your booklet

Latest revision as of 11:46, 3 June 2018

To bind a book using the glue book binding machine you will need to have your pages loose (b), and your cover (a) prepared as a spread.

Bookbinder-pages.png

  • Wait until the machine heat is 155 degrees
  • Place your contents into the left hand side slot
  • Place your cover sheet on the right hand side
  • Line up the center of your cover with the red arrow

Bookbinder-coverandcontents.png

  • Tighten the clamp until it will not tighten any further by pressing the button illustrated below

Bookbinder-clamp-button.png

  • Press the green button on the front

Bookbinder-green-button.png

  • Support the contents with your hand while the cover is attached to the content pages
  • Let the binding and cover clamp to fully disengage before you remove your booklet