Difference between revisions of "Quickstartguide:Etching"

From Publication Station
m
 
(14 intermediate revisions by one other user not shown)
Line 2: Line 2:


== Preparing the copper plate ==
== Preparing the copper plate ==
''The copper plate can be bought from the Metal Workshop''
The copper plate can be bought from the Metal Workshop
<br>
tip: Instead of copper plate you can use any material that you can scratch on (for example juice cardboard box)
 
* Bevel the corners of the copper plate
* Polish the plate with ''Brasso'' and a cloth
* '''tip''': ''pay special attention to the corners''
* Degrease the plate with Ketjap Manis (Fermented Soja)
* spread the Ketjap on the plate and using the soft side of a sponge
* '''disclaimer''': ''do not clean the sponge with water''
* Wash the plate with water and dry it with a clean cloth and put it in the oven for 10 minutes to dry completely
* Cover the plate with a ground we use a thin layer of ''Pledge'' (mixed with ink to make the wax not transparent) and leave it to dry
 
== Transferring your design ==
*Draw on top of the wax by scratching it lightly
'''disclaimer''': ''everything you scratch on the plate will be mirrored after printing''
* Attach a long stripe of clear tape to the back of the plate
*Put the plate in the Etching Bath
'''tip''': ''use the long strip of clear tape to prevent your plate of sinking in the etching bath''
* Rinse your plate with water and remove the tape
*Put the plate in a ''Dasty'' bath for 10 minutes
* Rinse the plate with water and let it dry completely
 
== Printing ==
1.

Latest revision as of 17:42, 15 May 2023


Preparing the copper plate

The copper plate can be bought from the Metal Workshop tip: Instead of copper plate you can use any material that you can scratch on (for example juice cardboard box)

  • Bevel the corners of the copper plate
  • Polish the plate with Brasso and a cloth
  • tip: pay special attention to the corners
  • Degrease the plate with Ketjap Manis (Fermented Soja)
  • spread the Ketjap on the plate and using the soft side of a sponge
  • disclaimer: do not clean the sponge with water
  • Wash the plate with water and dry it with a clean cloth and put it in the oven for 10 minutes to dry completely
  • Cover the plate with a ground we use a thin layer of Pledge (mixed with ink to make the wax not transparent) and leave it to dry

Transferring your design

  • Draw on top of the wax by scratching it lightly

disclaimer: everything you scratch on the plate will be mirrored after printing

  • Attach a long stripe of clear tape to the back of the plate
  • Put the plate in the Etching Bath

tip: use the long strip of clear tape to prevent your plate of sinking in the etching bath

  • Rinse your plate with water and remove the tape
  • Put the plate in a Dasty bath for 10 minutes
  • Rinse the plate with water and let it dry completely

Printing

1.