Difference between revisions of "Quickstartguide:Mirage"

From Publication Station
 
(17 intermediate revisions by 4 users not shown)
Line 1: Line 1:
<big>'''Printing with Mirage is very easy.'''</big>
==Choosing paper and putting it in==
*Select the type and size of paper you will use from these drawers.
[[File: 01 copy.png]]


*On the printer, pull the drawer where you will place the paper.If you want to use matte paper, go to the printer with MATTE sticker on it if you want to use glossy or luster paper use the printer with the GLOSSY sticker.
[[File: 03 copy.png | 250px]][[File: 04 copy.png | 250px]][[File: 05 copy.png | 250px]]


<big>On the Mac next to the Epson 5000 inkjet printer, drop your files on one of the droplets on the screen
*Place the paper always with the printable side down, touching the edges of the far-right corner of the drawer.It is very important for the A4 230 matte paper, luster paper and glossy
</big>
[[File: 06 copy.png | 250px]][[File: 07work.png | 250px]]


[[File:mirage droplet.jpg| 420px]]
*Adjust the guides so they touch the paper. Careful not to push them so much that they bend it.
 
[[File: 08 copy.png | 250px]][[File: 09 copy.png | 250px]]
 
*Push the drawer back in slowly but firmly until it is fully back.
 
[[File: 10 copy.png | 250px]]
The default setting would be '''Fit as large as possible on the paper'''.
==Sending and printing your file==
If you want it to be the exact size of your document, press the 100% button.
*Drag the file you want to print to one of the M logos. Chose the one that has the same paper dimensions on the name.
 
[[File: 11 copy.png | 600px]]
Doublecheck if the paper you put in the printer is the same size as it is shown in Mirage. It could be A4, A3, A3+ (=33x48 cm), or A2.
*Make sure that the size of the image is correct. Look at the preview to see how the image will look in the paper.
Place your paper always face down in the drawer.
[[File: 12 copy.png | 600px]]
 
*Chose the amount of copies
[[File:Screen Shot mirage.jpg ]]
[[File: 13 copy.png | 600px]]
 
*You can change the quality of the print.
Then press print on the lower right of the screen and enjoy the ride!
[[File: 14 copy.png | 600px]]
*Click print.

Latest revision as of 11:13, 31 August 2023

Choosing paper and putting it in

  • Select the type and size of paper you will use from these drawers.

01 copy.png

  • On the printer, pull the drawer where you will place the paper.If you want to use matte paper, go to the printer with MATTE sticker on it if you want to use glossy or luster paper use the printer with the GLOSSY sticker.

03 copy.png04 copy.png05 copy.png

  • Place the paper always with the printable side down, touching the edges of the far-right corner of the drawer.It is very important for the A4 230 matte paper, luster paper and glossy

06 copy.png07work.png

  • Adjust the guides so they touch the paper. Careful not to push them so much that they bend it.

08 copy.png09 copy.png

  • Push the drawer back in slowly but firmly until it is fully back.

10 copy.png

Sending and printing your file

  • Drag the file you want to print to one of the M logos. Chose the one that has the same paper dimensions on the name.

11 copy.png

  • Make sure that the size of the image is correct. Look at the preview to see how the image will look in the paper.

12 copy.png

  • Chose the amount of copies

13 copy.png

  • You can change the quality of the print.

14 copy.png

  • Click print.
Retrieved from ‘https://ps.wdka.nl/wiki/index.php?title=Quickstartguide:Mirage&oldid=9474’