Difference between revisions of "Quickstartguide:Roland"

From Publication Station
Line 22: Line 22:


* Open the CutStudioPlugin by clicking on the Illustrator menu Window>Extensions>RolandCutStudio
* Open the CutStudioPlugin by clicking on the Illustrator menu Window>Extensions>RolandCutStudio
[[File:Window extension.png|700px]]
[[File:Window extension.png|800px]]


* The preview box will show you what will be plot
* The preview box will show you what will be plot
[[File:Cutstudio-preview.png]]
[[File:First window extension.png|400px]]
<br>
<br>
* Depending on the setting, you may have to '''select everything in your graphic you want to plot'''
* Depending on the setting, you may have to '''select everything in your graphic you want to plot'''
* To make the knife start cutting/drawing in a given position on the piece of vinyl/paper, move the knife with the arrows and then press the button "Set Origin" on the plotter. Then make sure to tick the "Move to origin box on the Roland Cut Studio extension window as shown here.
[[File:Move to origin window.png|400px]]
* When you're ready, click the button with the plotter graphic
* When you're ready, click the button with the plotter graphic
<br>
<br>
[[File:Cutstudio-plotbutton.png]]
[[File:Cut icon.png|400px]]
<br>
<br>
* If the plotter is detected, click ''"Cut"''
* If the plotter is detected, click ''"Cut"''

Revision as of 10:54, 22 March 2022


  • Open Illustrator on the iMac
  • Open your file

Open on the Imac.jpg

  • If you have text, make sure you have made them into outlines. You can do it by selecting your text box and look for the option "Create Outlines" in quick actions or ---> (Type>Create Outlines/Shift+Ctrl+O)

Create outlines.png Outlines created.png

  • Set the blade or pen. Always make sure they are in place before cutting. If you don't find it inserted, look behind the plotter in the pencil holder. Dont know how?
  • Place your Sheet or Roll in the plotter. Dont know how?
  • Select the media type on the display and then press the enter button.


Roll selection.jpg
Piece selection.jpg

  • The plotter will show you the width of the roll, and measure the width and length of your sheet. Verify that your graphic in Illustrator is not bigger than the plot area


Lenght sheet.jpg


  • Open the CutStudioPlugin by clicking on the Illustrator menu Window>Extensions>RolandCutStudio

Window extension.png

  • The preview box will show you what will be plot

First window extension.png

  • Depending on the setting, you may have to select everything in your graphic you want to plot
  • To make the knife start cutting/drawing in a given position on the piece of vinyl/paper, move the knife with the arrows and then press the button "Set Origin" on the plotter. Then make sure to tick the "Move to origin box on the Roland Cut Studio extension window as shown here.

Move to origin window.png

  • When you're ready, click the button with the plotter graphic


Cut icon.png

  • If the plotter is detected, click "Cut"

Cutstudio-plotscreen.png

Setting Media

When setting up the media you will need to do the following:

  • Set the rollers under the white markings.


Plotter-roller-yes.png

  • When using a roll, place it in the holder at the base of the machine


Plotter-roll-placement.png

  • Then feed the edge of the roll from the back to the front so that it is under the rollers


Plotter-roll-feed.png

  • When using a sheet, feed it in making sure that it is under the rollers
  • Clamp the roll or sheet using the lever by pulling it towards you


Plotter-lever.png

Changing Pen/Blade

  • Loosen the blade holder by screwing the silver tightener anti-clockwise


Plotter-blade.png

  • If you are inserting a pen, make sure that when the holder is completely pressed the pen touches the surface you wish to draw on.


Plotter-pen.png

  • If you are inserting a blade, make sure that it is inserted as far as it can go.
  • Tighten the tightener by screwing it clockwise
  • Plot