|
|
| Line 5: |
Line 5: |
| | | | |
| | == UNCONTROLLABLE SUBSTANCES == | | == UNCONTROLLABLE SUBSTANCES == |
| − | I wanted to work with substances that can be used as paint, yet are also out of my control. I want to experiment how they behave and learn how I can control them. | + | I wanted to work with substances that can be used as paint, yet are also out of my control. I want to experiment how they behave and learn how I can control them. blabla intro text. |
| | | | |
| | === Research === | | === Research === |
| − | ==== Silk Screen ====
| |
| − | Screen printing is a printing technique that uses a woven mesh to support an ink-blocking stencil to receive a desired image. The attached stencil forms open areas of mesh that transfer ink or other printable materials which can be pressed through the mesh as a sharp-edged image onto a substrate. A fill blade or squeegee is moved across the screen stencil, forcing or pumping ink through the mesh openings to wet the substrate during the squeegee stroke. Basically, it is the process of using a mesh-based stencil to apply ink onto a substrate, whether it be T-shirts, posters, stickers, vinyl, wood, or other material.
| |
| | | | |
| − | Screen printing is also a stencil method of print making in which a design is imposed on a screen of polyester or other fine mesh, with blank areas coated with an impermeable substance. Ink is forced into the mesh openings by the fill and onto the printing surface during the stroke. As the screen rebounds away from the substrate the ink remains on the substrate. It is also known as silk-screen, screen, serigraphy, and serigraph printing. One color is printed at a time, so several screens can be used to produce a multi-colored image or design. | + | *[[/SilkScreen | Silk Screen]] |
| | + | *[[/Fungi | Fungi & Mold]] |
| | + | *[[/Coloring | Food & Paint]] |
| | | | |
| − | ===== History =====
| |
| − | Screen printing is a form of stenciling that first appeared in a recognizable form in China during the Song Dynasty (960–1279 AD). It was then adapted by other Asian countries like Japan, and was furthered by creating newer methods. Screen printing was largely introduced to Western Europe from Asia sometime in the late 18th century, but did not gain large acceptance or use in Europe until silk mesh was more available for trade from the east and a profitable outlet for the medium discovered.
| |
| | | | |
| − | Early in the 1910s, several printers experimenting with photo-reactive chemicals used the well-known actinic light–activated cross linking or hardening traits of potassium, sodium or ammonium chromate and dichromate chemicals with glues and gelatin compounds.
| |
| | | | |
| − | The Printers' National Environmental Assistance Center says "Screenprinting is arguably the most versatile of all printing processes." Since basic screenprinting materials are so affordable and readily available, it has been used frequently in underground settings and subcultures, and the non-professional look of such DIY culture screenprints have become a significant cultural aesthetic seen on movie posters, record album covers, flyers, shirts, commercial fonts in advertising, in artwork and elsewhere.
| + | === Ideas === |
| | | | |
| − | ===== The Technique =====
| |
| − | A screen is made of a piece of mesh stretched over a frame. A stencil is formed by blocking off parts of the screen in the negative image of the design to be printed; that is, the open spaces are where the ink will appear on the substrate. Before printing occurs, the frame and screen must undergo the pre-press process, in which an emulsion is 'scooped' across the mesh and the 'exposure unit' burns away the unnecessary emulsion leaving behind a clean area in the mesh with the identical shape as the desired image. The surface to be printed (commonly referred to as a pallet) is coated with a wide 'pallet tape'. This serves to protect the 'pallet' from any unwanted ink leaking through the screen and potentially staining the 'pallet' or transferring unwanted ink onto the next substrate. Next, the screen and frame are lined with a tape. The type of tape used in for this purpose often depends upon the ink that is to be printed onto the substrate. These aggressive tapes are generally used for UV and water-based inks due to the inks' lower viscosities. The last process in the 'pre-press' is blocking out any unwanted 'pin-holes' in the emulsion. If these holes are left in the emulsion, the ink will continue through and leave unwanted marks. To block out these holes, materials such as tapes, speciality emulsions and 'block-out pens' may be used effectively.
| |
| | | | |
| − | The screen is placed atop a substrate. Ink is placed on top of the screen, and a floodbar is used to push the ink through the holes in the mesh. The operator begins with the fill bar at the rear of the screen and behind a reservoir of ink. The operator lifts the screen to prevent contact with the substrate and then using a slight amount of downward force pulls the fill bar to the front of the screen. This effectively fills the mesh openings with ink and moves the ink reservoir to the front of the screen. The operator then uses a squeegee (rubber blade) to move the mesh down to the substrate and pushes the squeegee to the rear of the screen. The ink that is in the mesh opening is pumped or squeezed by capillary action to the substrate in a controlled and prescribed amount, i.e. the wet ink deposit is proportional to the thickness of the mesh and or stencil. As the squeegee moves toward the rear of the screen the tension of the mesh pulls the mesh up away from the substrate (called snap-off) leaving the ink upon the substrate surface.
| |
| | | | |
| − | Textile items printed with multicolored designs often use a wet on wet technique, or colors dried while on the press, while graphic items are allowed to dry between colors that are then printed with another screen and often in a different color after the product is re-aligned on the press. Most screens are ready for re-coating at this stage, but sometimes screens will have to undergo a further step in the reclaiming process called dehazing. This additional step removes haze or "ghost images" left behind in the screen once the emulsion has been removed. Ghost images tend to faintly outline the open areas of previous stencils, hence the name. They are the result of ink residue trapped in the mesh, often in the knuckles of the mesh (the points where threads cross).
| |
| | | | |
| | | | |
| − | === Ideas === | + | === Process === |
| | + | |
| | + | |
| | | | |
| | | | |
| | | | |
| − | === Process ===
| |
| | | | |
| | | | |
| | | | |
| | === Results === | | === Results === |
| | + | |
| | + | |
| | + | ===== Historical Example ===== |
| | + | |
| | + | ===== Comparative Example ===== |
| | + | |
| | + | ===== New Skill ===== |
| | + | |
| | + | ===== Pushing Limits ===== |
| | + | |
| | + | ===== Collective Example ===== |
| | + | |
| | + | |
| | + | |
| | + | ===== Artifact ===== |
| | + | |
| | + | |
| | + | |
| | + | ===== Statement ===== |
