Difference between revisions of "User:JeroenRijnart/HTBHQ11"

From DigitalCraft_Wiki
Jump to navigation Jump to search
Line 6: Line 6:
  
 
==Project 3: Mind (of) the Machine==
 
==Project 3: Mind (of) the Machine==
 +
 +
===The concept===
  
 
Conceptconceptconcept
 
Conceptconceptconcept
  
  
The idea was that by making [https://en.wikipedia.org/wiki/Voltage_divider voltage dividers] for every plug we would be able to identify which plugs are connected on the arduino.
+
===The hardware===
 +
 
 +
The idea was that by making [https://en.wikipedia.org/wiki/Voltage_divider voltage dividers] for every input plug we would be able to identify which input plugs are connected on the arduino.
  
 
Below you see the first prototype on a breadboard with some voltage dividers, here we found that when you connect two of the circuits the resistance (or rather, the voltage) of these two would become the same. This is how we tell the arduino that two plugs are connected.
 
Below you see the first prototype on a breadboard with some voltage dividers, here we found that when you connect two of the circuits the resistance (or rather, the voltage) of these two would become the same. This is how we tell the arduino that two plugs are connected.
Line 17: Line 21:
  
  
 +
Then we made a panel with jack inputs and connected it to the breadboard to see if this would still hold up.
  
 
[[file:motm_aj_p4.jpg | 800px]]
 
[[file:motm_aj_p4.jpg | 800px]]
 +
 +
 +
We can see on the computer that when no cables are connected we get six different numbers, as soon as we make a connection the numbers of the corresponding jack inputs become the same.
  
 
[[file:motm_aj_p2.jpg | 800px]]
 
[[file:motm_aj_p2.jpg | 800px]]
 +
 +
 +
Then we made the top panel for the box from semi transparent perspex, we expanded to sixteen voltage dividers, using different resistors for every input.
  
 
[[file:motm_aj_p3.jpg | 800px]]
 
[[file:motm_aj_p3.jpg | 800px]]
 +
 +
 +
The finished box with title and short legs under it.
  
 
[[file:motm_aj_p5.jpg | 600px]]
 
[[file:motm_aj_p5.jpg | 600px]]
 +
 +
 +
We made a system with magnets to seal the top panel to the box, we soldered the circuit and mounted everything in the box. You can shake the box or hold it upside down and it won't break. We wanted to make it as durable as possible.
  
 
[[file:motm_aj_p6.jpg | 600px]]
 
[[file:motm_aj_p6.jpg | 600px]]
 +
 +
 +
===The software===
 +
 +
processing processing processing

Revision as of 11:16, 10 October 2017

work in progress

Project 1: On The Body

Project 2: Inhuman Factors / Sensitivity Training

Project 3: Mind (of) the Machine

The concept

Conceptconceptconcept


The hardware

The idea was that by making voltage dividers for every input plug we would be able to identify which input plugs are connected on the arduino.

Below you see the first prototype on a breadboard with some voltage dividers, here we found that when you connect two of the circuits the resistance (or rather, the voltage) of these two would become the same. This is how we tell the arduino that two plugs are connected.

Motm aj p1.jpg


Then we made a panel with jack inputs and connected it to the breadboard to see if this would still hold up.

Motm aj p4.jpg


We can see on the computer that when no cables are connected we get six different numbers, as soon as we make a connection the numbers of the corresponding jack inputs become the same.

Motm aj p2.jpg


Then we made the top panel for the box from semi transparent perspex, we expanded to sixteen voltage dividers, using different resistors for every input.

Motm aj p3.jpg


The finished box with title and short legs under it.

Motm aj p5.jpg


We made a system with magnets to seal the top panel to the box, we soldered the circuit and mounted everything in the box. You can shake the box or hold it upside down and it won't break. We wanted to make it as durable as possible.

Motm aj p6.jpg


The software

processing processing processing