Difference between revisions of "User:Nsilver"

From DigitalCraft_Wiki
Jump to navigation Jump to search
 
(110 intermediate revisions by the same user not shown)
Line 26: Line 26:
 
== Initial projects and ideas==
 
== Initial projects and ideas==
 
[[File:Lampshade_noa.JPG|200px|thumb|right|The lampshade I initially made]]
 
[[File:Lampshade_noa.JPG|200px|thumb|right|The lampshade I initially made]]
At first I was thinking too much about product and too little about material and experimentation below is what I wrote and made then:
+
At first I was thinking too much about product and too little about material and experimentation I did some research concerning lampshades:
 
+
<br><br>
Lampshade
+
<s>Research Lampshade
(metal/paper Mâché, a historical example?)
 
Research Lampshade
 
 
[http://www.prettyprudent.com/2012/07/prudent-home/diy-how-to-make-a-paper-mache-lamp/ DIY instructions Paper Maché lamp]  
 
[http://www.prettyprudent.com/2012/07/prudent-home/diy-how-to-make-a-paper-mache-lamp/ DIY instructions Paper Maché lamp]  
This was the first hit on google images when typing 'Paper Maché lamp'
 
 
It is pretty common and easy to make your own DIY 'Paper Maché lamp, I want this lamp to have something different and unique.  
 
It is pretty common and easy to make your own DIY 'Paper Maché lamp, I want this lamp to have something different and unique.  
 
[http://researchdatabase.tumblr.com/post/113865940100/images-as-inspiration-for-lamp-project some photos]
 
[http://researchdatabase.tumblr.com/post/113865940100/images-as-inspiration-for-lamp-project some photos]
That's why I want to play with the light coming from the lamp and add in colours, or reflections and maybe motion to the lampshade.
+
TI want to play with the light coming from the lamp and add in colours, or reflections and maybe motion to the lampshade.
[http://25.media.tumblr.com/f492fdcdb965ca14835d52dd5dfc4d42/tumblr_mltj1qIsoy1rmv1vao1_400.gif]
+
[[WP:N|notable]].</s><br><br>
 +
I threw this idea out because it had little to do with material experimentation and learning new skills, which is what I set out to do in the Digital Craft course.
  
I threw this idea out because it had little to do with material experimentation.
 
  
=Candle-wax sculpture=
+
 
 +
'''Candle-wax sculpture'''
  
 
[[File:Clay_candle_wire.JPG|200px|thumb|right| An experiment of fusing with wax]]
 
[[File:Clay_candle_wire.JPG|200px|thumb|right| An experiment of fusing with wax]]
After receiving that feedback I wanted to just go and try. So I made this sculpture out of clay, wire, wood. It is fused by candle wax, I like the organic aesthetic it has. Jon did not seem to like it as much, I however could imagine a whole forrest made out of wire and candle wax, this could be used in an stop-motion film for example (thus also linking back to animation). This project has no continuation.
+
 
 +
I made this sculpture out of clay, wire, wood. It is fused by candle wax, I like the organic aesthetic it has. Jon did not seem to like it as much, I however could imagine a whole Forrest made out of wire and candle wax, this could be used in an stop-motion film for example (thus also linking back to animation). This project has no continuation because there were more interesting things to explore, which are shown below.
 +
 
 
<br>
 
<br>
 
<br>
 
<br>
Line 52: Line 52:
 
<br>
 
<br>
  
=Tie-wraps structure=
+
=Breathing tie-wraps structure=
 +
'''Continuing with a new skill and pushing a material to the limit. Together with the spaghetti structures also a comparative example. (check Spaghetti Structure)'''
  
 
[[File:Tie-wraps_construction.JPG|200px|thumb|right|A simple tie-wrap construction]]
 
[[File:Tie-wraps_construction.JPG|200px|thumb|right|A simple tie-wrap construction]]
 
The tie-wrap construction is something that is strong yet very agile when it comes to moving and bending. It could be interesting to make an moving piece out of this. I can imagine a breathing statue if you will. This piece was inspired by this: [https://vimeo.com/122548022 Maria Blaisse's BREATHING SPHERE], which I saw in an exhibition in Enschede.  
 
The tie-wrap construction is something that is strong yet very agile when it comes to moving and bending. It could be interesting to make an moving piece out of this. I can imagine a breathing statue if you will. This piece was inspired by this: [https://vimeo.com/122548022 Maria Blaisse's BREATHING SPHERE], which I saw in an exhibition in Enschede.  
  
 
INSERT PICTURE
 
 
[[File:Motor attachment print.JPG|200px|thumb|right|3Dprinted motor attachment]]
 
[[File:Motor attachment print.JPG|200px|thumb|right|3Dprinted motor attachment]]
 
[[File:Wiring motor hbrdige.JPG|200px|thumb|right|the wiring for the motor, a h-bridge to make it run both ways]]
 
[[File:Wiring motor hbrdige.JPG|200px|thumb|right|the wiring for the motor, a h-bridge to make it run both ways]]
 
[[File:Motorturning2.gif|left|Motor turning both ways it also varies speed.]]
 
[[File:Motorturning2.gif|left|Motor turning both ways it also varies speed.]]
 +
[[File:Breathingtiewraps.gif|left|more process pictures]]
 +
[[File:Breathing-tiewrap smaller.gif|left|The final installation at work]]
  
<br>
 
<br>
 
<br>
 
<br>
 
<br>
 
<br>
 
 
<br>
 
<br>
 
I lasercut a box that would could contain all the wiring for the aesthetic, which would also function as a pedestal for the tie-wrap structure to stand on.
 
I lasercut a box that would could contain all the wiring for the aesthetic, which would also function as a pedestal for the tie-wrap structure to stand on.
Line 81: Line 76:
 
The motor had this circular end to witch I could not attach a wire. I solved this by using what I learned from the 3D prints (below). I printed a part that would perfectly fit the end of the motor and have a little extension with a hole for the wire to wrap around.
 
The motor had this circular end to witch I could not attach a wire. I solved this by using what I learned from the 3D prints (below). I printed a part that would perfectly fit the end of the motor and have a little extension with a hole for the wire to wrap around.
  
 +
At first I tried turning it on bu the 3D print was a little to thin at a certain point and couldn't take the stress and broke. I hot-glued it back together and it actually seems stronger now, after some minor debugging changes the structure worked and was breathing.
  
 
<br>
 
<br>
Line 92: Line 88:
 
<br>
 
<br>
 
<br><br>
 
<br><br>
 +
 +
 +
 
<br>
 
<br>
 
<br><br>
 
<br><br>
 
<br>
 
<br>
 +
 +
 +
 +
 +
 +
 +
 +
 +
 +
 +
 +
 +
 +
 +
 +
 +
 +
 +
 +
 +
 +
 +
 +
 +
 +
 +
 +
 +
 +
 +
 +
 +
 +
 +
 +
 +
 +
 +
 +
 +
 +
 +
 +
 +
 +
 +
 +
 
<br>
 
<br>
  
INSERT MORE PICTURES
+
=Spaghetti structures=
 +
'''This is an comparative example.''' <br>
 +
[[File:Spaghetti triangle.JPG|200px|thumb|right|Spaghetti triangle 1]]
 +
Compared to the tie wrap structure this is rather straight and doesn't allow for movement. If it is bend the spaghetti breaks and the tie wraps don't. The spaghetti allows for more integrate triangle based sculptures whilst the tie wrap structure also allows for bend beams and circles.
 +
 
 +
 
 +
3D triangle made out of spaghetti and hot-glue. I enjoyed doing this because it give rather fast results. It was inspired by my girlfriend who studies architecture, she entered a competition where the challenge is to build a bridge that can hold the most weight. I ignored the challenge but just took the material to experiment with form. The spaghetti is pretty brittle and breaks even easier when hot. So it does require precision when gluing, which was something that was learned rather quick.
  
=Spaghetti structure=
 
3D triangle made out of spaghetti and hot-glue. I enjoyed doing this because it give rather fast results. The spaghetti is pretty brittle and breaks even easier when hot. So it does require precision when glueing, which was something that was learned rather quick.
 
  
[[File:Spaghetti triangle.JPG|200px|thumb|right|Spaghetti triangle]]
 
  
 
I continued with this and started making more structures. Moving away from primary shapes, like the triangle shown on the right. This one is still based on a triangular, just because that is strong. This was already more interesting to do because it was more freeing than the initial test.  
 
I continued with this and started making more structures. Moving away from primary shapes, like the triangle shown on the right. This one is still based on a triangular, just because that is strong. This was already more interesting to do because it was more freeing than the initial test.  
  
[[File:Spaghetti-gif-turn.gif|left|Spaghetti construction]]
+
 
 +
I then made some more where I used recycled laser-cut parts as the bottom so I had even more freedom in how the structure looked. It wouldn't have to stand on its own and thus more abstract shapes emerged. I also stopped using the standard spaghetti size. I cut the spaghetti smaller parts appropriate for each composition.
 +
 
 +
 
 +
 
 +
[[File:Spaghetti-gif-turn.gif|left|Spaghetti construction 2]]
 +
[[File:Spaghettionwood.gif|right|Spaghetti construction 2,3,4 ]]
  
  
INSERT MORE PICTURES
 
 
<br><br><br><br><br><br>
 
<br><br><br><br><br><br>
 
<br><br><br><br><br><br>
 
<br><br><br><br><br><br>
 
<br><br><br><br><br><br>
 
<br><br><br><br><br><br>
  
=3D Printing in school=
+
=Plastic Printing with the Ultimaker and Maya=
 +
'''This is an example of a new skill and with certain prints also a material pushed to the limit.'''
 
[[File:Initalmodel3dPrinterface_nooa.png|200px|thumb|right|The first model I tried to print.]]
 
[[File:Initalmodel3dPrinterface_nooa.png|200px|thumb|right|The first model I tried to print.]]
 
[[File:3Dtower_model_noa.png|200px|thumb|left|The 3D model of the geometrical tower.]]
 
[[File:3Dtower_model_noa.png|200px|thumb|left|The 3D model of the geometrical tower.]]
Line 120: Line 176:
 
I have been wanting to explore the 3D printer for a while and this practise gave me a chance to do so.  
 
I have been wanting to explore the 3D printer for a while and this practise gave me a chance to do so.  
 
On the right is the first model I tried to print, which did not come out as successful that was partly due to the kind of impossible mesh I made in this initial model. Below that is my first successful print. The model of which is shown on the left. I tried to make a structure which had a solid base and went up from there. So it would be easier for the printer to understand. It worked which was pretty exciting for me. I also liked to make it geometrical because this is just something I tend to do. Create order and shape things accordingly. Even in the initial model there is order, more organic but still there is order. Plus this geometrical precision is hard to achieve by hand but easy to achieve in the computer. One of the advantages of 3D printing.
 
On the right is the first model I tried to print, which did not come out as successful that was partly due to the kind of impossible mesh I made in this initial model. Below that is my first successful print. The model of which is shown on the left. I tried to make a structure which had a solid base and went up from there. So it would be easier for the printer to understand. It worked which was pretty exciting for me. I also liked to make it geometrical because this is just something I tend to do. Create order and shape things accordingly. Even in the initial model there is order, more organic but still there is order. Plus this geometrical precision is hard to achieve by hand but easy to achieve in the computer. One of the advantages of 3D printing.
 +
[[File:3Dtower_mold.JPG|200px|thumb|left|A clay mold made with the 3d Tower Print]]
 +
 +
 +
<br>
 +
<br>
 
<br>
 
<br>
 
I then pressed my printed tower into clay to make a mold as seen on the right. I did not continue this because it was not interesting for me and the hotglue prints that came out of this mold where ugly and not worth it.
 
I then pressed my printed tower into clay to make a mold as seen on the right. I did not continue this because it was not interesting for me and the hotglue prints that came out of this mold where ugly and not worth it.
Line 128: Line 189:
 
<br>
 
<br>
 
<br>
 
<br>
<br><br>
 
 
<br>
 
<br>
[[File:3Dtower_mold.JPG|200px|thumb|right|A clay mold made with the 3d Tower Print]]
+
<br>
 
[[File:3dprint_crane_noa.JPG|200px|thumb|right|My second print, a crane to test how the 3D printer would deal with an overhang.]]
 
[[File:3dprint_crane_noa.JPG|200px|thumb|right|My second print, a crane to test how the 3D printer would deal with an overhang.]]
 
[[File:Cranemodel_noa.png|200px|thumb|left|The model for the second print, created in Maya.]]
 
[[File:Cranemodel_noa.png|200px|thumb|left|The model for the second print, created in Maya.]]
Line 138: Line 198:
 
<br>
 
<br>
 
<br>
 
<br>
<br>
 
<br>
 
<br>
 
 
 
I then wanted to test the limits of the machine by printing a crane as suggested by Jon. To see how the printer would handle something that is not very predictable, contrasting with the tower.
 
I then wanted to test the limits of the machine by printing a crane as suggested by Jon. To see how the printer would handle something that is not very predictable, contrasting with the tower.
 
The overhang turned out quite nice and is something I could have explored further. This would be an example of a material pushed to the limit, but it can of course be pushed so much further. For the redo I had the chance to continue with the 3D printer and see what else I could create. Some examples below:
 
The overhang turned out quite nice and is something I could have explored further. This would be an example of a material pushed to the limit, but it can of course be pushed so much further. For the redo I had the chance to continue with the 3D printer and see what else I could create. Some examples below:
 +
[[File:Pineconetries.JPG|200px|thumb|right|Pinecone1 & 2]]
 +
[[File:Pineconetry2.JPG|200px|thumb|right|Pinecone 3]]
 +
 +
 +
 +
 +
 +
 +
 +
 +
  
 +
 +
 +
'''3D printing with overhang'''
 +
 +
Trying out pine shaped objects with the 3d printer seeing how it would handle more overhangs that overlap, this is a continuation from the crane. The first cone came out to perfect, it is just like a plastic pine cone.
  
 
<br>
 
<br>
Line 151: Line 223:
 
<br>
 
<br>
 
<br>
 
<br>
 +
The second try I made the overhanging pieces much longer so that it would be harder for the plastic to hold. I also made it smaller so it would be more likely to collapse. What came out is almost like a spiderweb. This is the desired effect, of course the actual result is still quite unpredictable. This happend because the printer did not handle the thinner upper parts so well and messed up creating the initially wanted structure to chaos relation. Where the bottom is like the tower print and the top is like my first print.
 
<br>
 
<br>
 
<br>
 
<br>
 
<br>
 
<br>
 
<br>
 
<br>
 +
 +
 +
 +
 +
'''3D printing bridges and upside down'''
 +
 +
[[File:Trianglebridge.JPG|200px|thumb|right|Triangle bridge halfway]]
 +
[[File:CIMG0356.JPG|200px|thumb|right|Triangle bridge]]
 +
[[File:Upside_down_print.JPG|200px|thumb|right|Upside down print with support structure]]
 +
[[File:Turntower.gif|left|Another tower model.]]
 +
[[File:Goebridge.gif|left|Geometric bridge]]
 +
Trying to print a bridge inside of a triangle, the bridge was not very successful however the triangle still turned out ok in a structural sense. Then i printed it again with a little edit to the mesh and then the bridge did come out as desired. Yet the printer also added something that was neither in Cura or Maya, which is pretty interesting. I assume there was something wrong with the file that it took so long and in the end ghost printed some parts.
 +
 +
Trying to print the bridge upside down. The bridge itself actually came out better than the normal printed one. However, a lot of support was added to make this possible. The challenge here was too not lay the object flat as Cura usually does for you, instead print it out with the unlogical end downwards. It was just a test to see if it was possible. The answer is yes but not without a support structure.
 +
 +
[[File:Mayapicsgif.gif|right|Maya renders]]
 +
 +
 +
The last two prints I experimented with form and tried to use what I learned from the previous sessions.
 +
 
<br>
 
<br>
 
<br>
 
<br>
<br><br>
 
 
<br>
 
<br>
 
<br>
 
<br>
 
<br>
 
<br>
<br><br>
 
 
<br>
 
<br>
 
<br>
 
<br>
UPLOAD MAYA PICS
 
 
=3D printing with overhang=
 
[[File:Pineconetries.JPG|200px|thumb|right|Pinecone1 & 2]]
 
 
Trying out pine shaped objects with the 3d printer seeing how it would handle more overhangs that overlap, this is a continuation from the crane. The first cone came out to perfect, it is just like a plastic pine cone.
 
[[File:Pineconetry2.JPG|200px|thumb|right|Pinecone 3]]
 
 
<br>
 
<br>
 
<br>
 
<br>
Line 179: Line 263:
 
<br>
 
<br>
 
<br>
 
<br>
The second try I made the overhanging pieces much longer so that it would be harder for the plastic to hold. I also made it smaller so it would be more likely to collapse. What came out is almost like a spiderweb. This is the desired effect, of course the actual result is still quite unpredictable. This happend because the printer did not handle the thinner upper parts so well and messed up creating the initially wanted structure to chaos relation. Where the bottom is like the tower print and the top is like my first print.
 
 
<br>
 
<br>
 
<br>
 
<br>
Line 188: Line 271:
 
<br>
 
<br>
 
<br>
 
<br>
 
=3D printing bridges and upside down=
 
[[File:Trianglebridge.JPG|200px|thumb|right|Triangle bridge halfway]]
 
[[File:CIMG0356.JPG|200px|thumb|right|Triangle bridge]]
 
[[File:Upside_down_print.JPG|200px|thumb|right|Upside down print with support structure]]
 
Trying to print a bridge inside of a triangle, the bridge was not very successful however the triangle still turned out ok in a structural sense. Then i printed it again with a little edit to the mesh and then the bridge did come out as desired. Yet the printer also added something that was neither in Cura or Maya, which is pretty interesting. I assume there was something wrong with the file that it took so long and in the end ghost printed some parts.
 
 
Trying to print the bridge upside down. The bridge itself actually came out better than the normal printed one. However, a lot of support was added to make this possible. The challenge here was too not lay the object flat as Cura usually does for you, instead print it out with the unlogical end downwards. It was just a test to see if it was possible. The answer is yes but not without a support structure.
 
 
[[File:Turntower.gif|left|Another tower model.]]
 
[[File:Goebridge.gif|left|Geometric bridge]]
 
 
<br>
 
<br>
 
<br>
 
<br>
 
<br>
 
<br>
 
 
<br>
 
<br>
<br><br>
 
 
<br>
 
<br>
<br><br>
 
<br><br><br>
 
 
<br>
 
<br>
<br><br>
 
 
<br>
 
<br>
 
<br>
 
<br>
 
<br>
 
<br>
 
<br>
 
<br>
<br><br>
 
 
<br>
 
<br>
<br><br>
 
 
<br>
 
<br>
 
<br>
 
<br>
 
<br>
 
<br>
 
<br>
 
<br>
<br><br>
 
 
<br>
 
<br>
 
<br>
 
<br>
 
<br>
 
<br>
 
<br>
 
<br>
<br><br>
 
 
<br>
 
<br>
 
<br>
 
<br>
Line 234: Line 297:
 
<br>
 
<br>
 
<br>
 
<br>
<br><br>
 
 
<br>
 
<br>
 
<br>
 
<br>
Line 243: Line 305:
 
<br>
 
<br>
  
=Printing Clay pots in Antwerpen (A Shared Example)=
+
=Printing Clay pots in Antwerpen=
 
[[File:3dprint_plasticpots_noa.JPG|200px|thumb|right|My third print, plastic trails before going to Unfold to print with clay.]]
 
[[File:3dprint_plasticpots_noa.JPG|200px|thumb|right|My third print, plastic trails before going to Unfold to print with clay.]]
  
<br>
+
'''This is an example of a new skill and a shared example'''
 +
 
 +
In the first lesson at Unfold Claire told me it would be useful to try out some of my design at the school 3D printer, which is what I did. These are three trails for the workshop at Unfold.
 +
 
 +
  
[[File:Pots3Dshots.gif|left|The 3D modelling process of the pots.]]
+
at Unfold I have printed with clay in combination with aluminium, copper, wood dust, wood pieces and glass. We have still to learn how these materials react together in the oven. We already know that the wood will leave holes in the clay, we hope the glass will give it a glaze. The copper and aluminium might give it a green look due to their oxides. All the plastic prints are quite small, smooth and hard. The clay prints where big and fragile, but after drying and baking will also turn smaller and go hard.
<br>
 
  
In the first lesson at Unfold Claire told me it would be useful to try out some of my design at the school 3D printer, which is what I did. These are three trails for the workshop at Unfold.
 
  
 
Something I wanted to explore was salt ceramics, however when me and Colin went to the printing workshop Dries told us that he didn't want salt in his oven because it gave of poison fumes.
 
Something I wanted to explore was salt ceramics, however when me and Colin went to the printing workshop Dries told us that he didn't want salt in his oven because it gave of poison fumes.
Line 259: Line 323:
 
* Metal dust and chips (iron/copper) - this was expected to maybe give a green glow from the oxidation that happens.
 
* Metal dust and chips (iron/copper) - this was expected to maybe give a green glow from the oxidation that happens.
 
* Glass powder - this was expected to give a glaze, it was a suggestion by Dries after I told him about the salt ceramics. This was the alternative.
 
* Glass powder - this was expected to give a glaze, it was a suggestion by Dries after I told him about the salt ceramics. This was the alternative.
 +
 +
  
 
[https://www.youtube.com/watch?v=7DgLSniX_Qw | a video edited by Colin of our ceramic pots being printed at Unfold studio]
 
[https://www.youtube.com/watch?v=7DgLSniX_Qw | a video edited by Colin of our ceramic pots being printed at Unfold studio]
 
+
<br><br>
 +
[[File:Pots3Dshots.gif|left|The 3D modelling process of the pots.]]
 
[[file:A_shared_example.gif|left|Clay Printing Process]]
 
[[file:A_shared_example.gif|left|Clay Printing Process]]
  
[[File:Printed-pots-baked.gif|left|Baked clay pots]]</left>
+
[[File:Printed-pots-baked.gif|left|Baked clay pots]]
 +
<br><br><br><br><br><br><br><br><br><br><br><br><br><br><br><br><br><br><br><br><br><br><br><br><br><br><br><br><br><br><br><br><br><br><br><br><br><br><br><br><br><br><br><br><br><br><br><br><br><br><br><br><br><br><br><br><br><br><br><br><br><br><br><br><br><br><br><br><br><br><br><br><br><br><br><br><br><br><br><br><br><br><br>
  
 +
<br><br><br><br><br>
 
The wood left holes as was expected. This gives the structure some interesting bends as can be seen on the pictures.
 
The wood left holes as was expected. This gives the structure some interesting bends as can be seen on the pictures.
  
Line 275: Line 344:
  
 
=Ceramics station:=
 
=Ceramics station:=
This is an example of a new skill  
+
'''This is an example of a new skill and a historical example''' <br>
 
First session
 
First session
 +
Was all about learning how to set up the pottery wheel and how to shape conical shapes to center the clay, which is something that is surprisingly hard.
 +
<br><br><br>
 
[[File:Ceramiekgifsmaller.gif|left|Modelling in the ceramics station]]
 
[[File:Ceramiekgifsmaller.gif|left|Modelling in the ceramics station]]
 
[[File:Ceramicsturntable1.gif|left|Turning pot on the turntable in the ceramics station]]
 
[[File:Ceramicsturntable1.gif|left|Turning pot on the turntable in the ceramics station]]
 
+
<br><br><br><br><br><br><br><br><br><br><br><br><br><br>
 +
<br><br><br><br><br><br><br><br><br><br><br><br><br><br><br><br>
 
Second session:
 
Second session:
 
+
Here I continued sketching and learning by doing. I kept recycling the clay because it was just about getting the technique right (still havent fully got it but it is getting better).<br> I had one pot which I liked and put away to dry so I could learn the rest of the process the next session.
 
[[File:Claysecondsession.gif|left|Turning more pots]]
 
[[File:Claysecondsession.gif|left|Turning more pots]]
to do explain the difference between printing a pot and moddeling a pot on the turntable and describe the difference in experience and end result
+
<br><br><br><br><br><br><br><br><br><br><br><br><br><br><br><br><br><br>
One clear difference I can already name is that with the printer you always get these layers, the hand-made pots are so much more smooth.
+
Third Session:
 +
In this session I learned how to take a dried pot and finish it off (afdraaien) after that I continued turning with a different more soft clay. Before I was only using sketching clay now I used modeling clay, which was much easier to shape. It felt like a relief switching from the hard heavy clay to the soft modeling clay which feels like butter compared to the sketch clay. It is more fragile but much nicer to work with.
 +
[[File:CERAMICSSESSION3.gif|left|Turning with different clay and learning how to finish the pots.]]
 +
<br><br><br><br><br><br><br><br><br><br><br><br><br><br><br><br><br><br><br><br>
  
= Deliverables/to do =
+
Fourth session:
 +
afdraaien
 +
Finishing off the pots after they dried for a day. I tried to use what I learned in the previous session. I did not take pictures because I forgot my camera before I went in I will take pictures when I bake next week and will be able to show you during the presentation.
  
# A historical example
+
Baked pots:
pot turning
 
# A comparative example
 
pot turning vs. pot printing out of clay vs. pot printing out of plastic
 
Plastic vs. Clay, in clay you have many limitations you do not have in plastic. For example in plastic you van print over 45 degrees, which is not possible with clay since it will just tumble down. Also, plastic dries almost instantly and clay takes a week. However you can also use the ceramics you print in your oven and microwave. This would not be a very good idea with the plastic, seeing it would just melt. The ceramics also is more tactile and pleasing to the touch, this is of course a personal preference. The ceramics also seems to take less time to print since it prints thicker layers than the plastic. Plastic is then in turn not breakable and ceramics is. It really depends on what you are making, but for dishes pots and such the ceramics printer is my favourite. For designing things trails and integrate stuff the plastic will be a better candidate.
 
# An example of a new skill
 
3d printing, arduino and turning clay on the pottery wheel
 
# An example of a material pushed to the limit
 
3d print/tiewrap structure
 
# A shared example
 
Unfold
 
  
  
UPDATE STATEMENT
+
One clear difference I can already name is that with the printer you always get these layers, the hand-made pots are so much more smooth.
 +
something I wrote earlier concerning this subject:
 +
Plastic vs. Clay, in clay you have many limitations you do not have in plastic. For example in plastic you van print over 45 degrees, which is not possible with clay since it will just tumble down. Also, plastic dries almost instantly and clay takes a week. However you can also use the ceramics you print in your oven and microwave. This would not be a very good idea with the plastic, seeing it would just melt. The ceramics also is more tactile and pleasing to the touch, this is of course a personal preference. The ceramics also seems to take less time to print since it prints thicker layers than the plastic. Plastic is then in turn not breakable and ceramics is. It really depends on what you are making, but for dishes pots and such the ceramics printer is my favourite. For designing things trails and integrate stuff the plastic will be a better candidate.
  
UPDATE TEXTS
+
Something that is note worthy for me is that the pot turning has a much more interesting process than the printing. Turning is calming and printing can be frustrating.
 +
<br>

Latest revision as of 23:51, 25 May 2015

murmurmurmur welcome

Links

Fusing and Bonding

Making by adding | First brainstorm additive processes

  • 3D printing
  • clay, paper mâché, soldering
  • Blending, lasercutter, gluegun
  • 3D printer
  • Claying
  • Melting
  • Smelting
  • Welding
  • Soldering
  • Paper mâché
  • Brick laying/mortar
  • Cooking
  • (new) kintsugi

Initial projects and ideas

The lampshade I initially made

At first I was thinking too much about product and too little about material and experimentation I did some research concerning lampshades:

Research Lampshade DIY instructions Paper Maché lamp It is pretty common and easy to make your own DIY 'Paper Maché lamp, I want this lamp to have something different and unique. some photos TI want to play with the light coming from the lamp and add in colours, or reflections and maybe motion to the lampshade. notable.

I threw this idea out because it had little to do with material experimentation and learning new skills, which is what I set out to do in the Digital Craft course.


Candle-wax sculpture

An experiment of fusing with wax

I made this sculpture out of clay, wire, wood. It is fused by candle wax, I like the organic aesthetic it has. Jon did not seem to like it as much, I however could imagine a whole Forrest made out of wire and candle wax, this could be used in an stop-motion film for example (thus also linking back to animation). This project has no continuation because there were more interesting things to explore, which are shown below.








Breathing tie-wraps structure

Continuing with a new skill and pushing a material to the limit. Together with the spaghetti structures also a comparative example. (check Spaghetti Structure)

A simple tie-wrap construction

The tie-wrap construction is something that is strong yet very agile when it comes to moving and bending. It could be interesting to make an moving piece out of this. I can imagine a breathing statue if you will. This piece was inspired by this: Maria Blaisse's BREATHING SPHERE, which I saw in an exhibition in Enschede.

3Dprinted motor attachment
the wiring for the motor, a h-bridge to make it run both ways
Motor turning both ways it also varies speed.
more process pictures
The final installation at work


I lasercut a box that would could contain all the wiring for the aesthetic, which would also function as a pedestal for the tie-wrap structure to stand on.

I followed this instructables to make the motor spin how i wanted it to. I however did not use a battery but a voltage converter so I would also have control over the speed of the motor, which was quite essential seeing I was still unsure how this would work later on. http://www.instructables.com/id/How-to-control-a-DC-motor-to-run-in-both-direction/

Insert process pictures of wiring here.

Soldering is also part of fusing and bonding and I am enjoying electronics more and more. So this was a nice challenge, since I am still a noobie in this field.

The motor had this circular end to witch I could not attach a wire. I solved this by using what I learned from the 3D prints (below). I printed a part that would perfectly fit the end of the motor and have a little extension with a hole for the wire to wrap around.

At first I tried turning it on bu the 3D print was a little to thin at a certain point and couldn't take the stress and broke. I hot-glued it back together and it actually seems stronger now, after some minor debugging changes the structure worked and was breathing.












































Spaghetti structures

This is an comparative example.

Spaghetti triangle 1

Compared to the tie wrap structure this is rather straight and doesn't allow for movement. If it is bend the spaghetti breaks and the tie wraps don't. The spaghetti allows for more integrate triangle based sculptures whilst the tie wrap structure also allows for bend beams and circles.


3D triangle made out of spaghetti and hot-glue. I enjoyed doing this because it give rather fast results. It was inspired by my girlfriend who studies architecture, she entered a competition where the challenge is to build a bridge that can hold the most weight. I ignored the challenge but just took the material to experiment with form. The spaghetti is pretty brittle and breaks even easier when hot. So it does require precision when gluing, which was something that was learned rather quick.


I continued with this and started making more structures. Moving away from primary shapes, like the triangle shown on the right. This one is still based on a triangular, just because that is strong. This was already more interesting to do because it was more freeing than the initial test.


I then made some more where I used recycled laser-cut parts as the bottom so I had even more freedom in how the structure looked. It wouldn't have to stand on its own and thus more abstract shapes emerged. I also stopped using the standard spaghetti size. I cut the spaghetti smaller parts appropriate for each composition.


Spaghetti construction 2
Spaghetti construction 2,3,4




















Plastic Printing with the Ultimaker and Maya

This is an example of a new skill and with certain prints also a material pushed to the limit.

The first model I tried to print.
The 3D model of the geometrical tower.
My first successful 3D print, A geometrical tower

I have been wanting to explore the 3D printer for a while and this practise gave me a chance to do so. On the right is the first model I tried to print, which did not come out as successful that was partly due to the kind of impossible mesh I made in this initial model. Below that is my first successful print. The model of which is shown on the left. I tried to make a structure which had a solid base and went up from there. So it would be easier for the printer to understand. It worked which was pretty exciting for me. I also liked to make it geometrical because this is just something I tend to do. Create order and shape things accordingly. Even in the initial model there is order, more organic but still there is order. Plus this geometrical precision is hard to achieve by hand but easy to achieve in the computer. One of the advantages of 3D printing.

A clay mold made with the 3d Tower Print





I then pressed my printed tower into clay to make a mold as seen on the right. I did not continue this because it was not interesting for me and the hotglue prints that came out of this mold where ugly and not worth it.







My second print, a crane to test how the 3D printer would deal with an overhang.
The model for the second print, created in Maya.






I then wanted to test the limits of the machine by printing a crane as suggested by Jon. To see how the printer would handle something that is not very predictable, contrasting with the tower. The overhang turned out quite nice and is something I could have explored further. This would be an example of a material pushed to the limit, but it can of course be pushed so much further. For the redo I had the chance to continue with the 3D printer and see what else I could create. Some examples below:

Pinecone1 & 2
Pinecone 3







3D printing with overhang

Trying out pine shaped objects with the 3d printer seeing how it would handle more overhangs that overlap, this is a continuation from the crane. The first cone came out to perfect, it is just like a plastic pine cone.






The second try I made the overhanging pieces much longer so that it would be harder for the plastic to hold. I also made it smaller so it would be more likely to collapse. What came out is almost like a spiderweb. This is the desired effect, of course the actual result is still quite unpredictable. This happend because the printer did not handle the thinner upper parts so well and messed up creating the initially wanted structure to chaos relation. Where the bottom is like the tower print and the top is like my first print.





3D printing bridges and upside down

Triangle bridge halfway
Triangle bridge
Upside down print with support structure
Another tower model.
Geometric bridge

Trying to print a bridge inside of a triangle, the bridge was not very successful however the triangle still turned out ok in a structural sense. Then i printed it again with a little edit to the mesh and then the bridge did come out as desired. Yet the printer also added something that was neither in Cura or Maya, which is pretty interesting. I assume there was something wrong with the file that it took so long and in the end ghost printed some parts.

Trying to print the bridge upside down. The bridge itself actually came out better than the normal printed one. However, a lot of support was added to make this possible. The challenge here was too not lay the object flat as Cura usually does for you, instead print it out with the unlogical end downwards. It was just a test to see if it was possible. The answer is yes but not without a support structure.

Maya renders


The last two prints I experimented with form and tried to use what I learned from the previous sessions.

























































Printing Clay pots in Antwerpen

My third print, plastic trails before going to Unfold to print with clay.

This is an example of a new skill and a shared example

In the first lesson at Unfold Claire told me it would be useful to try out some of my design at the school 3D printer, which is what I did. These are three trails for the workshop at Unfold.


at Unfold I have printed with clay in combination with aluminium, copper, wood dust, wood pieces and glass. We have still to learn how these materials react together in the oven. We already know that the wood will leave holes in the clay, we hope the glass will give it a glaze. The copper and aluminium might give it a green look due to their oxides. All the plastic prints are quite small, smooth and hard. The clay prints where big and fragile, but after drying and baking will also turn smaller and go hard.


Something I wanted to explore was salt ceramics, however when me and Colin went to the printing workshop Dries told us that he didn't want salt in his oven because it gave of poison fumes. We made it a shared example by all accepting an fixed diameter for the lower (10cm) and upper ring (7cm), so that the cups should be able to stack. Eventually Colin and me decided to print his structures smaller so they would fit inside of my bowls. We tried to experiment with mixing the clay with different materials. To see how it would react in the oven. We used:

  • Wood - this was expected to burn away in the oven and leave holes. We did both wood dust and putting wood in-between while it was printing.
  • Metal dust and chips (iron/copper) - this was expected to maybe give a green glow from the oxidation that happens.
  • Glass powder - this was expected to give a glaze, it was a suggestion by Dries after I told him about the salt ceramics. This was the alternative.


| a video edited by Colin of our ceramic pots being printed at Unfold studio

The 3D modelling process of the pots.
Clay Printing Process
Baked clay pots

























































































The wood left holes as was expected. This gives the structure some interesting bends as can be seen on the pictures.

The metal did not do much except solidify more and stick to the clay.

The glass turned the clay slightly darker but it is hardly noticable.

These results where a little disappointing and the most interesting turned out to be the wood, which I did not expect.

Ceramics station:

This is an example of a new skill and a historical example
First session Was all about learning how to set up the pottery wheel and how to shape conical shapes to center the clay, which is something that is surprisingly hard.


Modelling in the ceramics station
Turning pot on the turntable in the ceramics station































Second session: Here I continued sketching and learning by doing. I kept recycling the clay because it was just about getting the technique right (still havent fully got it but it is getting better).
I had one pot which I liked and put away to dry so I could learn the rest of the process the next session.

Turning more pots



















Third Session: In this session I learned how to take a dried pot and finish it off (afdraaien) after that I continued turning with a different more soft clay. Before I was only using sketching clay now I used modeling clay, which was much easier to shape. It felt like a relief switching from the hard heavy clay to the soft modeling clay which feels like butter compared to the sketch clay. It is more fragile but much nicer to work with.

Turning with different clay and learning how to finish the pots.





















Fourth session: afdraaien Finishing off the pots after they dried for a day. I tried to use what I learned in the previous session. I did not take pictures because I forgot my camera before I went in I will take pictures when I bake next week and will be able to show you during the presentation.

Baked pots:


One clear difference I can already name is that with the printer you always get these layers, the hand-made pots are so much more smooth. something I wrote earlier concerning this subject: Plastic vs. Clay, in clay you have many limitations you do not have in plastic. For example in plastic you van print over 45 degrees, which is not possible with clay since it will just tumble down. Also, plastic dries almost instantly and clay takes a week. However you can also use the ceramics you print in your oven and microwave. This would not be a very good idea with the plastic, seeing it would just melt. The ceramics also is more tactile and pleasing to the touch, this is of course a personal preference. The ceramics also seems to take less time to print since it prints thicker layers than the plastic. Plastic is then in turn not breakable and ceramics is. It really depends on what you are making, but for dishes pots and such the ceramics printer is my favourite. For designing things trails and integrate stuff the plastic will be a better candidate.

Something that is note worthy for me is that the pot turning has a much more interesting process than the printing. Turning is calming and printing can be frustrating.