User:ThomTrouwborst
Contents
Thom Trouwborst
Unravel The Code
Stealing from the museum
Fantastic Forgeries
Chosen object:
Information:
Maker: Anoniem
Titel: Maria met kind
Periode: 1350 - 1400
Materiaal: Marmer
Tekst Boijmans:
NL
Dit beeld van Madonna en kind is een karakteristiek voorbeeld van de elegante stijl, die zin in de late viertiende eeuw in Parijs en omgeving ontwikkelde en al snel in heel Europa werd nagevolgd. De dromerige uitdrukking van Maria en haar sierlijke houding zijn karakteristiek voor de zogenaamde internationale gotiek; de vaardig weergegeven draperie doet niet onder voor het beste werk uit de vroege renaissance.
EN
The sculpture of the Virgin and Child is a typical example of the elegant style that evolved in and around Paris in the late 14th century and was seen being imitated throughout Europe. The Virgin’s dreamy expression and graceful pose are characteristic of what is called International Gothic. The skillfully rendered drapery is a match for the best work of the early Renaissance.
Why
There are three main reasons why i choose this marble statue. The first reason is that i wanted to work in 3d. I, As a graphic designer you tend to work mostly in 2 dimension. So with this minor i hope to create project with more than 2 dimensions. The second reason is my fascination for religieus imagery and symbolism. For instance, the virgin which is presented in many many different ways throughout the history but through certain coder you can always tell it’s the Virgin Mary. Back then certain symbols always communicated the same things. Next to the symbolism i’m also very interested in the esthetic of religious imagery. Every time period has it’s own style and i want to use this project to really dive in to this huge topic because i never had the change to do this. The third reason is that a wanted to choose a work which is or was very iconic. Icons are used and reproduced in different contexts which makes it interesting for me. The icon of the virgin is weaved in several religions and cultures. In hese religions and cultures she is pictured differently and that makes it very interesting.
First Research
Different images of Virgin Mary's inside the Boijmans:
1st Year: ca 1420 (IT) 2nd Year: ca ...?(?) 3rd Year: ca 1490 -1495 (NL) 4th Year: ca 1520 (BE)
The scene above is a scene from my house. Both me and my girlfriend like the esthetic of a Virgin Mary so we collected several different ladies. Some of the imagery is Latin American, where the Virgin Mary is called "Nuestra Señora de Guadalupe". She is the patron of Mexico (and since 1945 of the entire continent; Latin America) The entire story
I photographed the different Virgins individually. As you can see, they al look very different but in the end you figure out it's a Virgin Mary without knowing the context. (DUH)
First steps
So the first thing that had to be done was making a 3d scan of the object itself. I wanted to do this in de exact same way as we did in the kick off. So i went back to the Boijmans en photographed the hell out of the statue!
LOOK @ THESE CRAZY GIFS
So the gifs give a glimpse in the pictures i took. Then i wanted to use 123DCatch to make the 3d scan complete. However, it didn't work on a mac..... Soooo after a few hours a found the tool RECAP360 which does exactly the same BUT you can upload more photo's, which was even beter. Recap 360 makes a pointcloud of a lthe pictures you taken of the object, just like 123dcatch.
These were the steps that followed
TEXTURE MAPS
First Prints
The most easy way to replicate this statue was 3d printing it. So that is what i did! At this stage i figured out i wanted to dive into making moulds. I thought this would give me the freedom to produce bootleg mary's in different materials. The 3d print would be used as negative. The first print was way to small so i figured i needed a bigger print to experiment more with molds.
Making Molds
So with the thought of making Mary of a different material, i dived into the world of making molds. Very quickly i found out the most materials are very expensive when you are making molds. Next to that, most materials used to make molds are highly toxic so doing this at home wasn't an option. I've watched a lot of tutorials on the webz and wanted to try a few techniques. 1 of those techniques was making a silicone mold. The only thing you needed for this was 100% silicone and dishwashing soap. WORLDS EASIEST SILICONE MOLD
YEAH I MELTED CHOCOLATE TO TRY OUT THE MOLD LMAO
This type of mold making is quite satisfying, it's really easy and also very accurate. The down side that it is harder to make a 2 piece mold out of this... OH yeah, it reeeeaaaalllyyy smells :( The next most logical step for me was to go to Ceramics and ask/learn how to really make a mold. So i did, i knew i could use the vacuum sealer but the guy from the workplace said this wasn't the best way so he talked me into making a mold of fluid rubber. I started with this instantly. But i never could image it would take ages to do this.....
After finding out this would take ages i also started to stumble on another problem. This problem is called SCALE. Al the things i've been trying out for the past week were based on a very small scale model. But it wasn't really an option to just 3d print a model of 90cm, this would be very boring and not very interesting. At first i was kind of stressing out because i could not think of any ways to do something about this. Then eventually Tim asked; "Can't you just do it in a lower resolution?" and then thing took of in a different direction.
LOW-RES
So the longer i thought of scaling up and turning the resolution down the more excited i got. In my research proces i came across a programs called 123DMAKE] which was perfect for the next step. This program can turn your mesh into a low res 3d modelkit. You can choose to slice your model or you can choose the fold your model. I choose to fold it. With this option, your 3d model wil be converted to polygonal shapes which are easy to fold. You can also can play with the resolution by changing the vertex count. I figured that i wanted to make more then 1 models so i prepared 3 different vertex counts and printed them out on A1 paper.
With 123DMake you can also generate other low res shapes. The program is made for a diy approach which is great for met because i'm very much is DIY-er myself. I think it is imported to really do thing to learn more about them.
Once i printed the models i started with the model with the lowest vertex count.
What is did not expect was that is would take a lot of time to build these things and this was just the easiest(!?) In the end i wanted to be very precise so i took my time when i was cutting the prints. With the folding a felt that sometimes the paper wasn't strong enough... With this in mind a started with the second model with 60 vertex count. I worked the same way as the last one but with more detail it also gets harder to see where the piece fits in the puzzel. I lost about 3 days with the second model, i was very determined to finish it but i couldn't figure it out. Which was very frustrating!
Moving on
Along with the frustration on nog completing the second model also came time pressure. I've been building and trying stuf out for week but haven't thought of the transformation yet... I've made several thing that could work as a replica. The thing that was missing was a story. I went back to my research and thought of thing that could be told with the things i made. In order to tell this story if found that i needed to try te use the paper model as a mold. In the end this was the thing is was interested and this was the initial plan but i kind of forgot about it. So someone gave me a tip that is could use Plextol to make paper waterproof. I also purchase some latex early on in the proces which i haven't used yet. So i took the model with the 30 vertex count, which is a very interesting shape by the way. I taped al the seams of the model en then applies about 3 layers of Plextol on the model. This made the model indeed waterproof but it didn't made it more steady unfortunately. To really be sure i also applied the latex on the seams and soft spots. When everything was dry i started making plaster, which was also my first time. I figured i could just pour it in layer for layer. So in the end everything went quite wel. The paper was strong enough to hold 3kg of plaster so i was quite happy. When everything dried up it started to take of the mold, which didn't had to be used again so i could just tear it of. On some spots the paper and tape got stuck on the plaster but this wasn't hard to take of. The result is pretty cool, i couldn't actually imagine that it would look like this, what is a good thing in my opinion. I probably didn't completely mixed the plaster in the right way but i think the imperfections on the model are super nice. When it's standing up, you immediately get the feeling it is something holy or sacred. Which is also a good thing because i was afraid this wouldn't be the case. The only thing i'd had to do was figure out how it could stand up.
The Final low-res model
So after i completed al the steps above. I had this crazy plaster model of a low-res madonna. In able to present it proper i needed tot add a plinth so the model was able to stand up.
The Story
So as i introduced earlier, i needed to get my thoughts straight and figure out which story i wanten to tell with the object. I was thinking realy really hard of what story i should tell. The best that i came up with during the vacation was that the statue be a symbol for the dehumanization of society. But after the last talk with Tim if feel kind of stupid because that just isn't true. Society is getting harder sometime but not les humane. Still i stink that the statue is completely dehumanized.
However this isn't the interesting part. I feel like there are 2 main things that are interesting to tell a story about in combination with the work. The first one is that the image of Mary doesn't actually holds any value. For instance, the little Mary figures i have at home (top of the page) they are decorative and for me quit meaningless. They are nice to look at but the actual value we give to it is the emotional value humans have with them. The message Mary communicates always stays the same. The Mary may change a little bit in her appearance but the story doesn't. This is actually exactly what Oliver Laric shows with his versions. The image of Mary gets reproduced over and over again voor centuries now, each new one is just a different version of the original one (if there is even 1 original). Therefore it makes me think if in this case the resolution would even matter? The form that is left now isn't directly recognizable but is came from a classic version of a Madonna. If you put this form in a religious context, i think i could easily replace the classic Mary. The story stays the same, the posture is somewhat the same, Mary still is the symbol for the human part of catholic religion but just in a different resolution. I showed this work to my mother in law and it made her think of the KKK. Which basically isn't weird because the costumes the KKK uses are just a bad copy of the costumes penitents wear during Semana Santa. Which is the week before easter in catholic Spanish speaking countries. So consciously or unconsciously you connect it to some sort of religious image. I could have produced more low resolution models but for now i think this one is enough to prove the point. It could have been any low res shape. I've made some sketches of different forms. Some of them are almost the same as the model i have now, some are more 2d. But al of them are images of Mary in a different resolution.
The second topic is the actual act of reproducing. My chosen object is dated between 1350 and 1400, at the start of the international gothic. Back then this statue was carved out of marble. The maker probably studied for years to master the skill of carving the perfect human shape out of a piece of marble. He probably dedicated his life for it. Now it's 2015 and we have tons of techniques to carve shapes out of al the materials you can think of. The craft of being a sculptor is slowly changing into a virtual sculptor. Now we sculpt it in programs like Rhino, Maya or Mudbox. If we want to bring these virtual models to the real world we also have tons of techniques that can print, mill or cut out our model. In the proces of making this object is also used programs that helped me making this, it wasn't particularly hard to do and i didn't completely understand how it works but i'm able to produce a model like this. I think the model has a very interesting form but i can imagine that is real sculptor doesn't thinks the same way. I did this completely DIY without any real feedback of a professional but in the end i was able to do it. So you could say everyone could have made this. However this fact makes it a lot less valuable for me in the sense of al of the effort i personally put into it. But it becomes more valuable in the sense of the accessibility. You could say that everything should be available for everyone so that we have our own freedom to create what we want, when we want it.
Exhibition presentation
I found this image on the webz when i was looking for Mary altars. I really like this alignment, i like the typography and the symmetry. I didn't knew what ik ment though so i had the look that up. So this alignment is from the Legion of Mary,It this is a lay catholic organization whose members are giving service to the Church in almost every country. For these members there is a handbook how to set up the services they are giving. This service is called a PRAESIDIUM MEETING. The first step by setting up this meeting is arranging the altar. I think this setting is very appropriate because i want to prove the point that the image of Mary doesn't hold any value. By replacing the classical image of Mary with my Model i'm basicly showing my model has the same value as any other version of Mary.
Reflection
So this was the first project of the real Digital craft minor. Last year i also did the practice so i knew a little bit what to expect. This first assignment was quite an interesting project. First of al, i was super happy that this was an individual project. However, the amount of real lesson were low so we had a lot of time to work during the week, which was a good thing in my opinion. For me it really worked because i could focus on something different every week. In the end time wil always be your biggest enemy. I very happy about the thing i came up with the past weeks. I wanted to get more familiar with working 3 dimensional and i did. Something i felt like i didn't had enough spatial awareness. But i pushed trough and i did make a impressive 3d work for this assignment. Working with molds and plaster were also very new for me and i've learned a lot working with these materials and i'm also quite motivated now to use these techniques more often. However, if i look at al the things i have now, it feels like i could have produced some more things. But every week i've been doing tests en research so i think that i had more time i would be able come up with more low res models for instance. But for now i made the decision to focus myself on completing the first model completely en getting my presentation and story straight. Something to keep in mind for the next assignment is figuring out what story i'm telling simultaneously with the making proces. For now this was kind of a big deal because the first few week i was completely focusing on making replica's. The only thing i thought of were ways of making and i wasn't paying attention to what these ways could tell or what the eventual model could tell. Then 2 weeks before the deadline i was freaking out about this. I made al these thing without a real concept or story... But after talking to more people than just myself i realized that i indeed was telling a story but i wasn't conscious i did. So that is quite an important point to keep in mind for the future. Next to that i want to push myself to really keep making more stuff in the proces because now i did started with making things but the quantity isn't that much. But in the end i do believe in the saying "quality over quantity" so i think i can be very satisfied with my project.
Written assignment
TBA
Tools of the trade
Statement:
My mayor is Graphic Design. I’ve been studying this for 7 years now. When i was young, all i ever wanted to do when i grew up was making images. This is just a element of graphic design but a VERY important one in general but also for me personally. I am a image maker, how i make these images changes very fluidly, i draw, write, cut, paste, distort or clean up analog and digitally or both. Images can be made with a very specific purpose but images can also arise. The most interesting images for me are the ones that go beyond what i already know. This is hard because how can you make something you don’t know?
First ideas/scenarios:
- 1. How can a tool create images that i can’t make?
- 2. How can a digital tool create what i make, analog, with my hands?
- 3. How can sound literally by more integrated in my work and/or influence my work?
- 4. How can i make designing for printing purpose more tangible?
