Editing Quickstartguide:HolePuncher

{{Template:Quickstartguide}}

=== Step 1. Place your paper in the slit on top ===
=== Step 2. Punch the holes using the peddle on the right of the machine  ===
=== [if necessary] Step 3. How to adjust the punch holes? ===

* Release the punching unit by turning the handle on the right side of the machine towards you (counter-clockwise) 
* Pull out the punching unit 
* Remove the metal place holder by pulling it up
* The row of individual punches has appeared. Remove the desired punches
* Return the metal place holder 
* Place the punching unit back in the machine 
* Lock the punching unit back in place by turning the handle away from you (clockwise). <br> Twist until the green light on the top left of the machine lights up 
* Now you can go back to step 1
* If you have removed any of the punches, please put them back when you are done using the machine.