Editing Businesscards

== How to make business cards ==

'''Printstudio'''
Prepare your design in InDesign. Make a new document with the dimensions 8,5 x 5,5 cm. If you need a full page color or picture for the background, make it bigger than the dimensions of the business card (bleed 3mm). It should have at least 3 mm bleed. With the exporting to PDF you can determine how much bleed you want. 3 mm is normal.
[[File:Business card sample 1.jpg|thumb]]



If you want a design on the back of your card, add another page. Now export your file to '''PDF/X a:2011''' and put the Marks and bleeds on Crop Marks and Bleed on 3mm.

If you take a look at the PDF, you can see the cropmarks. 

Next step is to put '''9 cards''' on one A4. Make a new document A4 and place the PDF on the page. With the short cut '''Alt-Command U''' ''(step and repeat)'' you can repeat your selection. Put the distance on 91 mm horizontal and 61 vertical. That is the size of the card + 6mm on both sides. Rows and Columns on 3. Click on '''Create as a Grid''' and check the Preview button.

Export the new file with 9 cards as a pdf. This time do not use the bleed and cropmarks. Be sure that, when you have a double sided card, everything is centered on both sides of the card.

The more precise you work, the easier it is to cut later on. Keep in mind that 1 millimeter is a LOT on a business card and almost nothing on an A0 (A-zero) poster. So do not put text to close to the edge and do not try to align something on the front with the back. Printers have a tolerance of a few millimeters with printing on both sides.
[[File:Step and repeat.jpg|thumb]]

Choose a nice, thick paper and put at least 10 sheets in the multipurpose tray. Go to the '''Paper catalogue''' after you double-clicked on your file in '''Fiery Command Workstation (held folder)'''. Find the paper. Numbers match with the numbers on the drawers. Print one sample and cut it first to ensure you did not make a mistake. When it is okay, print some more. 10 sheets will give you 90 business cards.

Cut your sheets on the big '''cutting machine'''. Start with cutting off the white edges. Keep one sheet apart to measure. Start measuring from the edge of the paper to the cropmarks that are the most far away. Type this distance in on the grey keys on the machine and '''press '=' twice'''. This is your first cut. When the border is cut off, measure the distance for the next cut. That would be the three cards on the right. For the next cut (6 mm less, that is the space between the cards) you can type in –0.6 and twice the = button. After this, you do –8.5 cm and – 0.6. For the last row, type in 8.5 and '=' twice.

Now you have three strokes with three cards on each. Make one big pile and cut the cards to 85 x 55 mm.
[[File:9 cards.jpg|thumb]]