Editing Quickstartguide:Gluebinder (section)

=How to use the glue binder=

To bind a book using the glue book binding machine you will need to have your pages loose '''(b)''', and your cover '''(a)''' prepared as a spread.

[[File:Bookbinder-pages.png | 400px]]

* Wait until the machine heat is 155 degrees
* Place your contents into the left hand side slot
* Place your cover sheet on the right hand side
* Line up the center of your cover with the red arrow
[[File:Bookbinder-coverandcontents.png | 600px]]

* Tighten the clamp until it will not tighten any further by pressing the button illustrated below
[[File:Bookbinder-clamp-button.png | 400px]]

* Press the green button on the front
[[File:Bookbinder-green-button.png | 400px]]

* Support the contents with your hand while the cover is attached to the content pages
* Let the binding and cover clamp to fully disengage before you remove your booklet