Editing Quickstartguide:Mirage (section)

==Choosing paper and putting it in the printer==
*Purchase the paper with one of the instructors. You will need to pay in advance. 

Paper types available are:
''Mat 170g'' or ''230g'', ''Glossy'' or ''Luster'' (semi-glossy paper)

*On the printer, pull the drawer where you will place the paper.If you want to use matte paper, go to the printer on the right (the one with MATTE sticker on it) if you want to use glossy or luster paper use the printer on the left (with the GLOSSY sticker). 
[[File: 03 copy.png | 250px]][[File: 04 copy.png | 250px]][[File: 05 copy.png | 250px]]

*Place the paper always with the printable side down, touching the edges of the far-right corner of the drawer. The "printable side down" rule is very important for the luster and glossy paper
[[File: 06 copy.png | 250px]][[File: 07work.png | 250px]]

*Adjust the guides so they touch the paper. Careful not to push them so much that they bend it.
[[File: 08 copy.png | 250px]][[File: 09 copy.png | 250px]]
*Push the drawer back in slowly but firmly until it is fully back.
[[File: 10 copy.png | 250px]]