Editing Quickstartguide:Transferpress (section)

== Setting up ==

1. Switch the machine on with the red switch on the top of the machine.

[[File:On off switch heat press.jpg|320px]]


2. Go to the presets menu to choose the according settings. *[[#settings|What do these settings mean?]]

[[File:Heat press main menu.jpg|320px]] [[File:Heat press presets menu.jpg|320px]]



3. Put your fabric on the plate by opening the boad with the black handle

[[File:Heat press handle.jpg|320px]] [[File:Heat press placing fabric.jpg|320px]]
<br>


4. Press the blue handle down until it clicks to start the heating process
(release the handle after you start hearing the beeping sound and the screen turns green)

There are 2 steps of heating:
# Preheat the fabric
# Place the material (sublimation print/flex/flock etc.) on top of the fabric

The machine automatically switches from step 1 to step 2. If you want to go back to any step you can just press the according number


Step 1

[[File:Heat press blue handle.jpg|320px]] [[File:Heat press done green screen.jpg|320px]]
<br> <br>


Step 2

[[File:Heat press step 2.jpg|320px]]


Wait till the temperature is right. You can see the remaining time on the top of the screen.
(Don't leave a hot machine unattended!)



5. To turn off the machine press the power button on the screen. This will put the machine in a stend by mode.
Afterwards you can switch off the machine entirely from the red on/off switch on the top of the machine.


[[File:Heat press switch off sign.jpg|320px]] [[File:Heat press stand by mode.jpg|320px]]