Quickstartguide:C600i - Revision history

Darina at 10:15, 11 September 2025

2025-09-11T10:15:40Z

← Older revision		Revision as of 10:15, 11 September 2025
Line 120:		Line 120:

	You can also bring your own paper in A4 or A3 size, check with the instructors if the paper is suitable for our printers.		You can also bring your own paper in A4 or A3 size, check with the instructors if the paper is suitable for our printers.


	----------------------------------------------------		----------------------------------------------------


	'''Choosing the Right Printer: Examples'''		'''Choosing the Right Printer: Examples'''
Line 179:		Line 181:


	<big>'''When in doubt ask the station ~~instructor~~ for help.''' 😊 </big>		<big>'''When in doubt ask the station instructors for help.''' 😊 </big>

Darina at 10:14, 11 September 2025

2025-09-11T10:14:24Z

← Older revision		Revision as of 10:14, 11 September 2025
Line 148:		Line 148:
	[[File:Canon_Held.jpeg]]		[[File:Canon_Held.jpeg]]

	2. Double-click your file to open the “'''Job ~~Proprieties~~'''” window		2. Double-click your file to open the “'''Job Properties'''” window

	3. Fill in the fields in “'''Quick Access'''” according to your design:		3. Fill in the fields in “'''Quick Access'''” according to your design:

Darina at 09:54, 11 September 2025

2025-09-11T09:54:05Z

← Older revision		Revision as of 09:54, 11 September 2025
Line 27:		Line 27:
	#		#
	# Done!		# Done!


			[[File:Convert pdf.png]]



	==<big>'''Meet the Printers'''</big>==		==<big>'''Meet the Printers'''</big>==

Darina at 09:45, 11 September 2025

2025-09-11T09:45:05Z

← Older revision		Revision as of 09:45, 11 September 2025
Line 27:		Line 27:
	#		#
	# Done!		# Done!


	==<big>'''Meet the Printers'''</big>==		==<big>'''Meet the Printers'''</big>==
Line 71:		Line 70:
	If you’re printing a stapled booklet or magazine, use the '''Canon Magazine'''.		If you’re printing a stapled booklet or magazine, use the '''Canon Magazine'''.
	Its trimming feature finishes the booklet to A4 or A5 size, no need for manual cutting!''		Its trimming feature finishes the booklet to A4 or A5 size, no need for manual cutting!''



Line 117:		Line 115:

	You can also bring your own paper in A4 or A3 size, check with the instructors if the paper is suitable for our printers.		You can also bring your own paper in A4 or A3 size, check with the instructors if the paper is suitable for our printers.


	----------------------------------------------------		----------------------------------------------------


	'''Choosing the Right Printer: Examples'''		'''Choosing the Right Printer: Examples'''
Line 140:		Line 136:
	We're here to help! 😊		We're here to help! 😊



	==<big>'''Printing'''</big>==		==<big>'''Printing'''</big>==
Line 180:		Line 175:

	<big>'''When in doubt ask the station instructor for help.''' 😊 </big>		<big>'''When in doubt ask the station instructor for help.''' 😊 </big>

Darina at 09:44, 11 September 2025

2025-09-11T09:44:10Z

← Older revision		Revision as of 09:44, 11 September 2025
Line 2:		Line 2:
	{{Template:Quickstartguide}}		{{Template:Quickstartguide}}

	<big>'''Before You Start: Important Info'''</big>		==<big>'''Before You Start: Important Info'''</big>==

	Our Canon printers can handle a wide range of print jobs,		Our Canon printers can handle a wide range of print jobs,
Line 28:		Line 28:
	# Done!		# Done!

	~~----------------------------------------------------~~

	<big>'''Meet the Printers'''</big>		==<big>'''Meet the Printers'''</big>==

	There are two large Canon printers in the Print Studio,		There are two large Canon printers in the Print Studio,
Line 73:		Line 72:
	Its trimming feature finishes the booklet to A4 or A5 size, no need for manual cutting!''		Its trimming feature finishes the booklet to A4 or A5 size, no need for manual cutting!''

	~~----------------------------------------------------~~

	<big>'''Paper Types (Currently Loaded)'''</big>
			==<big>'''Paper Types (Currently Loaded)'''</big>==

	Each printer has specific papers already loaded.		Each printer has specific papers already loaded.
Line 140:		Line 139:

	We're here to help! 😊		We're here to help! 😊



	~~----------------------------------------------------~~		==<big>'''Printing'''</big>==


	<big>'''Printing'''</big>

	1. Drag your file to the '''“Held”''' folder in the Fiery app		1. Drag your file to the '''“Held”''' folder in the Fiery app
Line 185:		Line 182:


	~~----------------------------------------------------~~

	<big>'''Printing a magazine'''</big>		==<big>'''Printing a magazine'''</big>==

	You need to have a PDF (PDF/X: a:2001) with single pages, so '''no spreads'''.<br>		You need to have a PDF (PDF/X: a:2001) with single pages, so '''no spreads'''.<br>

Darina at 09:40, 11 September 2025

2025-09-11T09:40:02Z

← Older revision		Revision as of 09:40, 11 September 2025
Line 27:		Line 27:
	#		#
	# Done!		# Done!

			----------------------------------------------------

	<big>'''Meet the Printers'''</big>		<big>'''Meet the Printers'''</big>
Line 72:		Line 73:
	Its trimming feature finishes the booklet to A4 or A5 size, no need for manual cutting!''		Its trimming feature finishes the booklet to A4 or A5 size, no need for manual cutting!''

			----------------------------------------------------

	<big>'''Paper Types (Currently Loaded)'''</big>		<big>'''Paper Types (Currently Loaded)'''</big>
Line 117:		Line 118:

	You can also bring your own paper in A4 or A3 size, check with the instructors if the paper is suitable for our printers.		You can also bring your own paper in A4 or A3 size, check with the instructors if the paper is suitable for our printers.


			----------------------------------------------------


Line 137:		Line 141:
	We're here to help! 😊		We're here to help! 😊


			----------------------------------------------------


	<big>'''Printing'''</big>		<big>'''Printing'''</big>
Line 179:		Line 185:


	~~--------~~----------------------------------------------------		----------------------------------------------------

	<big>'''Printing a magazine'''</big>		<big>'''Printing a magazine'''</big>

Darina at 09:37, 11 September 2025

2025-09-11T09:37:37Z

← Older revision		Revision as of 09:37, 11 September 2025
Line 74:		Line 74:


	'''Paper Types (Currently Loaded)'''		<big>'''Paper Types (Currently Loaded)'''</big>

	Each printer has specific papers already loaded.		Each printer has specific papers already loaded.
Line 92:		Line 92:
	* Tracing paper (A3 – for screen printing)		* Tracing paper (A3 – for screen printing)
	*		*


	'''Canon Magazine (right):'''		'''Canon Magazine (right):'''

Line 154:		Line 156:
	<big>'''Follow the next steps If you’re filling in the “Quick Access” manually:'''</big>		<big>'''Follow the next steps If you’re filling in the “Quick Access” manually:'''</big>

	~~(Added screenshot with numbers to the list below)~~		[[File:Canon job properties.png]]

	1. How many copies do you need?		1. How many copies do you need?

	2. Choose your desired paper from “'''Paper Catalogue'''”~~. “'''In Tray'''” section shows papers that are already inside. Anything below is custom~~.		2. Choose your desired paper from “'''Paper Catalogue'''”.

	3. ~~Paper source: If you picked paper from~~ the ~~“In Tray” option of the paper catalogue, keep the paper source on “Auto tray”~~. ~~If you picked any custom paper or brought your own, change the paper source to “Multipurpose tray”~~		“'''In Tray'''” section shows papers that are already inside.
			Anything below the dashed line is custom.

	4. If you want to print double sided, you can choose between Short Edge and Long Edge:		3. If you want to print double sided, you can choose between '''Short Edge''' and '''Long Edge''':
	Landscape files should be Short Edge (this applies to all booklets)		* Landscape files should be Short Edge (this applies to all booklets)
	Portrait files should be Long Edge.		* Portrait files should be Long Edge.

			4. Paper source: If you picked paper from the “'''In Tray'''” option of the paper catalogue, keep the paper source on “Auto tray”. If you picked any custom paper, or brought your own, change the paper source to “Multipurpose tray”

	5. There are additional settings for when you want to print a booklet, check the advanced guide below		5. There are additional settings for when you want to print a booklet, check the advanced guide below

	6. If you’re finished with settings press the grey “Print” button.		6. If you’re finished with settings press the grey “Print” button.

	~~- click 'OK' to save your setting<br>~~
	~~- if the printer is free you can click "print"<br>~~

	~~[[File:Canon_ok_print.jpeg]]~~



	'''When in doubt ask the station instructor for help.'''		<big>'''When in doubt ask the station instructor for help.''' 😊 </big>



			------------------------------------------------------------

	<big>'''Printing a magazine'''</big>		<big>'''Printing a magazine'''</big>

	You need to have a PDF (PDF/X: a:2001) with single pages, so no spreads.<br>		You need to have a PDF (PDF/X: a:2001) with single pages, so '''no spreads'''.<br>
	Preferably a total amount of pages that is ~~devidable~~ by 4, so 8, 12, 16, 20, 24 etc.~~<br>~~		Preferably a total amount of pages that is dividable by 4, (so 8, 12, 16, 20, 24, etc...)<br>
	~~Otherwise you will have blank pages in your magazine~~.<br>		Drag it to the '''held folder''' and check if there is a '''Preset''' for the type of booklet you'd like.<br>
	Drag it to the '''held folder''' and ~~choose~~ a '''Preset''' ~~that begins with Booklet~~.<br>		The standard setting is for a whole booklet printed on the same type of paper.<br>
	The standard setting is for a ~~"self cover" magazine. Then the cover is~~ the same paper ~~as the rest~~.<br>		You can have the booklet stapled by the machine. Go to "'''Finishing'''" and choose "'''Saddle Stitch'''". With all this set up you can click "'''Print'''".
	~~If you have less or as much as 24 pages (= 6 sheets), you~~ can have it stapled by the machine. Go to "Finishing" and choose "Saddle Stitch". With all ~~the presets~~ you can click Print ~~now and the complete magazine falls out of the machine, only the~~ "~~Booklet_manual_Feed" asks for more settings~~.~~<br>~~
	~~<br>~~

	'''Booklet on other paper than the papers already in the Canon printer'''<br>		'''Booklet on other paper than the papers already in the Canon printer'''<br>
	You can choose paper from our collection (~~drawers 1-22~~) or even buy your own paper somewhere else. In these cases you have to pick the right paper from the Paper Catalog or pick a Media Type. Do not forget to Define Cover in the Layout Menu. The printer will first print the cover, also when it is a self cover. So when you cover is a separate document, you also have to go to "Define Cover"~~. For stapling, see above~~.<br>		You can choose paper from our collection (check paper catalogue) or even buy your own paper somewhere else. In these cases you have to pick the right paper from the "'''Paper Catalog'''" or pick a Media Type. Do not forget to "'''Define Cover'''" and "'''Paper source'''" in the "'''Layout Menu'''". The printer will first print the cover, also when it is a self cover. So when you cover is a separate document, you also have to go to "Define Cover".<br>

	<br>		<br>
	'''Gluebinding'''<br>		'''Gluebinding'''<br>
	When you want a gluebinded book, ~~ask us to turn~~ the machine on. ~~That~~ will take at least a ~~half hour~~.		When you want a gluebinded book, check if the machine is on. Heating up will take at least a 40-50 minutes.
	~~You can use the booklet function~~ as well, but now turn off the folding and stapling in Finishing. You can cut the printed sheets in half and make one pile. Remember that, if you have a lot of pages (<100) you need a spine in your cover. Make two ~~carves with a folding bone for the spine. In the glue binder, the line close to the back~~ of ~~your cover should align with~~ the ~~arrow on the glue binder where you put your cover.<br>~~		Prepare your file as two separate documents: inside of the book and a cover.
	~~You can also print on A4 if you are making an A4 booklet. Now you have to cut off the paper on the left side before glue binding. It is cheaper though to print on A3~~ and ~~cut in half. To be save, print the booklet smaller than A4 (95% or lower) so there is still~~ a ~~flexible margin for the~~ cover.~~<br><br>~~



	~~== 6. avoid paper jams ==~~

	~~It will happen! <br><br>~~
	~~But when you follow these rules, you can '''avoid''' or minimise the paper jams.<br><br>~~
	~~1. Do not mix up Clear Film with Tracing Paper.<br>~~
	~~2. Put '''at least 10 sheets''' more than you are printing in the multi purpose tray. <br>~~
	~~3. Let the pile of paper breathe. Take the ends, hold firm and twist a little. Now some air gets in between the sheets to prevent them to get stuck to another sheet.<br>~~
	~~4. Do not print double sided on paper thicker than 250 grams. Glossy goes fine, Greenlabel not. If it gets stuck more than two times in a row, print your paper twice single sided.<br>~~
	5. Glossy 115 A3 with a full black print on it will get stuck frequently in the fuser. Maybe because the machine heatens up too much there. Wait a minute before trying again. Do not print a lot of very black images full size A3 directly after each other. <br>
	~~6. Do not let the printer staple more than 6 sheets 120 grams (24 page magazine), 4 sheets 160 grams, 2 sheets 250 gram.<br>~~
	~~7. '''With 'YOUR OWN PAPER' we try twice'''. So if it does not print after the second try, or it gets jammed, we skip your paper. <br>~~
	~~8. Textured aquarel paper will be likely to jam. Also already rolled up paper or damaged paper.<br>~~
	~~9. Do not print paper that is not cut properly. A paper that is 21 cm X 28 cm will jam if you send it as an A4.~~







	~~At the printer's paper tray<br>~~
	~~[[File: Canon_Paperguide2.jpg]]<br>~~
	~~Put your paper in the multi-purpose tray and close the slides until the printer recognises~~
	~~your paper size. <br>~~
	~~Press ''change'' at paper type.<br>~~

	~~[[File: Canon_Paperguide3.jpg]]<br>~~
	~~To find the paper type menu you need for your own paper, select ''standard paper type'' in the drop-down menu on the left.<br>~~

	~~[[File: Canon_Paperguide4.jpg]]<br>~~		Inside of the book should be exported as single pages, Cover should be exported as a spread.
	~~Use~~ the ~~menu to select ''the same paper type'' you selected in the printing program.<br>~~
	~~Press ok twice and you are ready to go~~.

Darina at 08:21, 11 September 2025

2025-09-11T08:21:23Z

← Older revision		Revision as of 08:21, 11 September 2025
Line 152:		Line 152:


			<big>'''Follow the next steps If you’re filling in the “Quick Access” manually:'''</big>

	~~== 1. Drag~~ to ~~Held ==~~		(Added screenshot with numbers to the list below)

	~~[[File:Canon_Held~~.~~jpeg]]~~		1. How many copies do you need?

			2. Choose your desired paper from “'''Paper Catalogue'''”. “'''In Tray'''” section shows papers that are already inside. Anything below is custom.

	* drag your pdf from the ~~desktop to~~ the ~~line called "Held"~~		3. Paper source: If you picked paper from the “In Tray” option of the paper catalogue, keep the paper source on “Auto tray”. If you picked any custom paper or brought your own, change the paper source to “Multipurpose tray”
	* double-click your ~~file~~ to ~~open the options window~~

	~~== 2~~. ~~Fill in the Quick Access ==~~		4. If you want to print double sided, you can choose between Short Edge and Long Edge:
			Landscape files should be Short Edge (this applies to all booklets)
			Portrait files should be Long Edge.

	~~[[File: Canon_QuickAccess~~.~~jpeg]]~~		5. There are additional settings for when you want to print a booklet, check the advanced guide below

	~~'''Fill in the fields according to your design'''<br>~~		6. If you’re finished with settings press the grey “Print” button.
	~~<br>~~
	~~For thin paper (100-160 grams) you start with '''PRESETS'''~~. ~~<br>~~
	~~120 gram A4 and A3, 160 gram and 100 gram green label are already in the machine, <br>~~
	~~we named the trays 1,2,3 and paper deck<br>~~
	~~For paper from our own collection (drawer 1 - drawer 22) you start~~ with the ~~'''PAPER CATALOG'''.<br>~~
	~~if you brought your own paper, use '''MEDIA TYPE''' and find a description that suits.<br>~~

	~~1. How many copies do you need?<br>~~
	~~2. choose your desired paper-size (A4, A3)<br>~~
	~~3. what kind of paper would you like to print on? <br>~~
	~~- The numbers in the paper catalogue match the numbers on our paper drawers.<br>~~
	~~- Media type will automatically change.<br>~~
	~~4. The orientation, or 2-sided printing has to be chosen. You can choose between ''Short Edge'' and ''Long Edge''. <br>~~
	~~'''Landscape''' files should be ''Short Edge'' <br>~~
	~~'''Portrait''' files should be ''Long Edge''.<br>~~

	~~== 3. Send to Print ==~~
	~~<br>~~
	~~[[File:Canon_ok_print~~.~~jpeg]]<br>~~

	- click 'OK' to save your setting<br>		- click 'OK' to save your setting<br>
	- if the printer is free you can click "print"<br>		- if the printer is free you can click "print"<br>

			[[File:Canon_ok_print.jpeg]]
	~~== 4. Adding paper manually ==~~

	~~If you bought paper somewhere else, beware of three aspects of the paper~~: the weight, the size and if it is glossy or matte. Try to find the most similar paper in our own paper selection, using our '''paper catalog'''. If there is no such paper in our drawers, go to '''Media Type''' and find the right description there.



	~~- Make sure to check the package of you paper for the weight of the paper:<br>~~
	~~The Canon C600i can print on '''up to 300 grams''' paper.<br>~~
	~~- Upload your pdf 2001 file as always into the Fiery Command workstation Held folder and double click your file to open the properties/setup window. Select MEDIA in the left column. <br>~~

	~~[[File: Canon_Paperguide1~~.~~jpg]]~~		'''When in doubt ask the station instructor for help.'''


	~~1. Manually select the multi-purpose tray as paper source and chose your paper size.<br>~~
	~~2. Instead of using the paper catalog, you use the '''media type menu''' to select the weight of your paper.<br><br>~~
	~~For matt paper use the “heavy” settings, for glossy and coated paper use the “2-sided coated” settings. <br><br>~~

	~~'''When in doubt ask the station instructor for help.'''<br>~~
	~~<br>~~

	~~== 5. printing~~ a magazine ==		<big>'''Printing a magazine'''</big>

	You need to have a PDF (PDF/X: a:2001) with single pages, so no spreads.<br>		You need to have a PDF (PDF/X: a:2001) with single pages, so no spreads.<br>

Darina at 08:03, 11 September 2025

2025-09-11T08:03:51Z

Show changes

Darina at 07:39, 11 September 2025

2025-09-11T07:39:45Z

← Older revision		Revision as of 07:39, 11 September 2025
Line 1:		Line 1:

	{{Template:Quickstartguide}}		{{Template:Quickstartguide}}

			<big>'''Before You Start: Important Info'''</big>

			Our Canon printers can handle a wide range of print jobs,
			from flyers and postcards to booklets and glossy magazines.
			Before printing, please make sure your file and format are correct:

			'''File Format'''

			'''Canon printers accept PDF files only!'''

			Recommended: '''PDF/X (2001)''', for best compatibility and print quality.
			Other formats like JPG or PNG need to be converted to a PDF first.

			'''Converting Images to PDF on a Mac:'''

			If you have JPG (or multiple images), here’s a quick way to convert them:

			# Select your image(s)
			#
			# Right-click
			#
			# Choose '''Quick Actions → Create PDF'''
			#
			# Done!


			<big>'''Meet the Printers'''</big>

			There are two large Canon printers in the Print Studio, each suited for different materials and project types:

			'''Canon Bulk (left side)'''

			Best for everyday printing on '''Plain''' or '''Greenlabel''' paper and '''Screenprinting'''.
			Ideal for:

			* A4 or A3 documents (single or double-sided)
			*
			* A5 flyers or postcards
			*
			* Business cards
			*
			* Simple booklets (e.g., A5 size)
			*
			* A4 or A3 tracing paper for Screenprinting


			'''Canon Magazine (right side)'''

			Designed for glossy prints, magazines, and professional-quality booklets.
			Includes a trimming unit for finished sizes.

			Perfect for:

			A4 magazines or booklets

			A4 or A3 documents (single or double-sided)

			Posters and flyers on glossy paper

			Saddle-stitched (stapled) booklets with clean-cut edges

			Studio Tip:
			If you’re printing a stapled booklet or magazine, use the Canon Magazine.
			Its trimming feature finishes the booklet to A4 or A5 size, no need for manual cutting!



			Paper Types (Currently Loaded)

			Each printer has specific papers already loaded. Here’s what’s available:

			Canon Bulk (left):

			Plain 100g (A4 / A3)

			Plain 250g (A4 / A3)

			Greenlabel 100g (A4+)

			Greenlabel 200g (A4+)

			Tracing paper (A3 – for screen printing)

			Canon Magazine (right):

			Plain 100g (A4)

			Greenlabel 100g (A3+)

			Greenlabel 200g (A3+)

			Glossy 150g (A3+)

			Glossy 250g (A4+ / A3+)

			Need More Paper Options?

			We also offer a wider variety of paper types and sizes not loaded in the printers.

			To explore your options:

			Check the Physical Paper Catalogue (available on the table)

			Or ask instructors, we’re happy to help you find the right material for your project

			You can also bring your own paper in A4 or A3 size, check with the instructors if the paper is suitable for our printers.


			Choosing the Right Printer: Examples

			Example 1:

			You want to print an A5 booklet on Greenlable paper with a thinner interior and thicker cover.
			→ Use Canon Bulk: it has both paper weights pre-loaded.

			Example 2:

			You’re printing a glossy A4 magazine with staple binding and trimmed edges.
			→ Use Canon Magazine: it supports glossy paper and has the trimming unit.

			Need Support?

			If it’s your first time visiting studio, you're unsure which printer to use, how to prepare your file, or what paper works best: Ask someone from the Print Studio Team.

			We're here to help! 😊



			Printing

			1. Drag your file to the “Held” folder in the Fiery app

			2. Double-click your file to open the “Job Proprieties” window

			3. Fill in the fields in “Quick Access” according to your design:

			Before filling the fileds manually check the “Presets” in the upper right corner of the pop-up window.