Difference between revisions of "Quickstartguide talk:Roland"

From Publication Station
(Blanked the page)
 
(2 intermediate revisions by one other user not shown)
Line 1: Line 1:
__NOTOC__


== Quickstart ==
* Open Illustrator
* Open your file
* If you have text, make sure you have made them into outlines
[[File:Ai-text.png]]
[[File:Ai-text-outlines.png]]
* Set the blade or pen. [[#pen|Dont know how?]]
* Place your Sheet or Roll in the plotter. [[#set|Dont know how?]]
[[File:Plotter-roll.png]]
[[File:Plotter-sheet.png]]
* Select the media type on the display
[[File:Plotter-roll-media.png]]
[[File:Plotter-sheet-media.png]]
* The plotter will show you the width of the roll. Verify that your graphic in Illustrator is not bigger than the plot area
[[File:Plotter-size.png]]
* Open the CutStudioPlugin. Window>Extensions>CutStudioPlugin
* Depending on the setting, you may have to select everything in your graphic you want to plot
* The preview box will show you what will be plot
[[File:Cutstudio-preview.png]]
* When you're ready, click the button with the plotter graphic
[[File:Cutstudio-plotbutton.png]]
* If the plotter is detected, click ''"Cut"''
[[File:Cutstudio-plotscreen.png]]
== <span id="set"></span> Setting Media ==
When setting up the media you will need to do the following:
* Set the rollers ''under'' the white markings.
[[File:plotter-roller-yes.png]]
* When using a '''roll''', place it in the holder at the base of the machine
[[File:plotter-roll-placement.png]]
* Then feed the edge of the roll from the back to the front so that it is under the rollers
[[File:plotter-roll-feed.png]]
* When using a '''sheet''', feed it from the front so that it is under the rollers
* Clamp the roll or sheet using the lever by pulling it towards you
[[File:plotter-lever.png]]
== <span id="pen"></span> Changing Pen/Blade ==

Latest revision as of 19:03, 13 March 2018