Quickstartguide:Transferpress: Difference between revisions

Revision as of 12:48, 24 October 2023

1. Switch the machine on with the red switch on the top of the machine.

2. Go to the presets menu to choose the according settings.

3. Put your fabric on the plate by opening the boad with the black handle

This setting can be used to transfer Flex and Flock vinyls or to fix your screen printed design on a piece of fabric.

For more information about Sublimation Printing, go to this page.

Wait till the temperature is right (don't leave a hot machine unattended). The machine will beep when it's ready.

@@ Line 3: / Line 3: @@
 == Setting up ==
-Switch the machine on with the switch on the left side of the machine.
+. Switch the machine on with the red switch on the top of the machine.
+[[File:On off switch heat press.jpg|320px]]
-[[File:Heatpress off.png|320px]]
+<br>
+<br>
+. Go to the presets menu to choose the according settings.
-* Press the '''OK''' button
+[[File:Heat press main menu.jpg|320px]] [[File:Heat press presets menu.jpg|320px]]
-* Set the temperature with the up and down buttons
-* Press the '''OK''' button
-* Set the time with the up and down buttons
-* Press the '''OK''' button
+<br>
+. Put your fabric on the plate by opening the boad with the black handle
+[[File:Heat press handle.jpg|320px]] [[File:Heat press placing fabric.jpg|320px]]
-If the heat press was cold it will say "LO" until it reaches 100 degrees Celcius. From there on up it will tell you how hot it is.
 == Settings for Flex and Flock transfers & Silkscreen Heat Fixation ==