Quickstartguide talk:Roland

Quickstart

• Open Illustrator
• Open your file
• If you have text, make sure you have made them into outlines

• Set the blade or pen. Dont know how?

• Place your Sheet or Roll in the plotter. Dont know how?

• Select the media type on the display

• The plotter will show you the width of the roll. Verify that your graphic in Illustrator is not bigger than the plot area

• Open the CutStudioPlugin. Window>Extensions>CutStudioPlugin
• Depending on the setting, you may have to select everything in your graphic you want to plot
• The preview box will show you what will be plot

• When you're ready, click the button with the plotter graphic

• If the plotter is detected, click "Cut"

Setting Media

When setting up the media you will need to do the following:

• Set the rollers under the white markings.

• When using a roll, place it in the holder at the base of the machine

• Then feed the edge of the roll from the back to the front so that it is under the rollers

• When using a sheet, feed it from the front so that it is under the rollers
• Clamp the roll or sheet using the lever by pulling it towards you