Quickstartguide talk:Gluebinder

From Publication Station
Revision as of 12:33, 13 March 2018 by Eastwood (talk | contribs)

To bind a book using the glue book binding machine you will need to have your pages loose (b), and your cover (a) prepared as a spread.

Bookbinder-pages.png

  • Wait until the machine heat is 155 degrees
  • Place your contents into the left hand side slot
  • Tighten the clamp until it will not tighten any further by pressing the button illustrated below

Bookbinder-clamp-button.png

  • Place your cover sheet on the right hand side
  • Line up the center of your cover with the red arrow

Bookbinder-coverandcontents.png

  • Press the green button on the front

Bookbinder-green-button.png

  • Support the contents with your hand while the cover is attached to the content pages
  • Let the binding and cover clamp to fully disengage before you remove your booklet
Retrieved from ‘https://ps.wdka.nl/wiki/index.php?title=Quickstartguide_talk:Gluebinder&oldid=6998’