Quickstartguide:Transferpress

From Publication Station
Revision as of 13:50, 24 October 2023 by Ivet (talk | contribs)


Setting up

1. Switch the machine on with the red switch on the top of the machine.

On off switch heat press.jpg



2. Go to the presets menu to choose the according settings.

Heat press main menu.jpg Heat press presets menu.jpg



3. Put your fabric on the plate by opening the boad with the black handle

Heat press handle.jpg Heat press placing fabric.jpg


4. Press the blue handle down until it clicks to start the heating process (release the handle after you start hearing the beeping sound and the screen turns green)

There are 2 steps of heating:

  1. Preheat the fabric
  2. Place the material (sublimation print/flex/flock etc.) on top of the fabric

The machine automatically switches from step 1 to step 2. If you want to go back to any step you can just press the according number


Step 1

Heat press blue handle.jpg Heat press done green screen.jpg


Step 2

Heat press step 2.jpg


Wait till the temperature is right. You can see the remaining time on the top of the screen. (Don't leave a hot machine unattended!)




5. To turn off the machine press the power button on the screen. This will put the machine in a stend by mode. Afterwards you can switch off the machine entirely from the red on/off switch on the top of the machine.


Heat press switch off sign.jpg Heat press stand by mode.jpg