User:H.Hottinga

From DigitalCraft_Wiki
Jump to navigation Jump to search

Hiske Hottinga

Gekozen object: foto van Infinity Mirror Room van yayoi Kusama De door mij gekozen foto: Yayoi Kusama en haar studio

Yayoi Kusama.jpg

Infinity Mirror Room

Foto infinity room.jpg

Proefjes met oase

Oase test.jpg

Mijn motivatie en inspiratie ontbrak voor dit 'object'. Ik had een verhaal/ gevoel nodig voor ik daadwerkelijk een object kon kiezen.

De afgelopen weken heb ik veel getwijfeld over welk object ik zou gaan kiezen. Ik heb een persoonlijk verhaal nodig wat mij raakt om gemotiveerd te zijn voor wat ik ga doen. Toevallig had ik dat gister toen ik aan het wandelen was. Ik was aan het denken hoe vreselijk ik de maatschappij van tegenwoordig vind met zijn technologie. Mensen gaan helemaal op in de technologie van tegenwoordig en vergeten de wereld om zich heen. De schoonheid van de wereld wordt vergeten. Eerlijk is eerlijk: ik kan prima mijn tijd verspillen online, maar ik voel dat ik buiten het gelukkigst ben. Dat gevoel wil ik graag delen . Daarom wil ik iets technologies combineren met de natuur.


Object .jpg

Ik heb dit object, Ariante fan, gekozen van Marco Zanuso. Ik heb hiervoor gekozen vanwege de moderniteit die mij niet aanspreekt, het is eigenlijk compleet het tegenover gestelde van wat ik normaal zou kiezen. Het materiaalgebruik zijn kunststoffen, strakke rechte lijnen, eentonig primair kleurgebruik.

Bij de reproductie van mijn object heb ik gekozen om te lasercutten met het materiaal hout. Dit was voor mij een logische keus omdat ik technologie met natuur wil combineren. Hout kan nadat het bewerkt is met een techniek goed bewerkt worden door invloeden uit de omgeving.

Eerste snelle proeven met de lasercutter

Test 1.jpg

graferen

Test 2.jpg

Close up test 2.jpg

graferen in combinatie met restmateriaal

Test 3.jpg

300px

Hierna begon ik te zoeken naar hoe ik mijn object kon veranderen. Mijn object heeft een heel statisch lijnenspel, patroon. Hierom keek ik vervolgens naar statische patronen in de natuur: - Ruggengraat

Ruggengraat.jpg

300px

Uitprobeersel klei.jpg

- nerven van bladeren

Images.jpg

-takken

Takken-zwart-wit-13355815.jpg

Lijm test.jpg


Maar what to do...

Zoekend naar kunstenaars die hout bewerken en mij inspireren

Winde Rienstra

Winde rienstra 1.jpg

Winde Rienstra 2.JPG

Stephanie Nieuwenhuyse

Stefanie Nieuwenhuyse 1.jpg

Stefanie Nieuwenhuyse 2.png

Aron Demetz

Aron demetz 1.jpg

Aron demetz 2.jpg

Vervolgens kwam ik tot de conclusie dat ik mijn restmaterialen veel interessanter vond dan wat ik eerder al gelasercut had. Hier ging ik vervolgens mee experimenteren.

10679703 752389098177323 790857429782156792 o.jpg

10537976 752375311512035 4623898078142746470 o.jpg

10603706 752377068178526 8952951881449578742 n.jpg

10636770 752375551512011 6056382540441655193 o.jpg

10647191 752375251512041 6668125593741910270 n.jpg

10714512 752377161511850 2528184803891857848 o.jpg

De structuren die hieruit komen trekken met name mijn aandacht

kusntwerken die mij interesseren Mozaiek, Rob Tack

Rob Tack.jpg


Egyptisch doosje

1966310 752388958177337 6882241497495481939 o.jpg

Aboriginal museum

1911900 752387291510837 996398877736794170 n.jpg

1926013 752387621510804 2713298731410370281 o.jpg

Reproductie

Reproductie.jpg

Reproductie1.jpg

Nadat ik eindelijk mijn definitieve reproductie gemaakt had vond ik mijn hoofdvraag: hoe kan ik van een statische vorm iets organisch maken?

Proefje

1209320 752396044843295 1537373442333622202 n.jpg

Windspinner.JPG

Inspiratie: de Wind Spinner. The solution.

proefje

1891425 752377264845173 2503610890223419883 o.jpg

10420290 752401011509465 7455708789489964602 n.jpg

10702036 752396144843285 7521339583665153356 n.jpg

Dynamicversion.jpg

Written Assignment

1. What is my craft?

My craft is fashion. I always start with a feeling, a personal story what gives me certain kind of strong emotions: really sad, heavenly happy, etc. Something I can imagine a whole world around it. I draw my feelings, sketch atmospheres and I search for any excisting images which fit my theme. It is for me an easy way to start my project what can also isnpire me to go deeper into my project. From there I’m really looking for materials which can inspire me, how I can use and manipulate them and how I can give them my personal twist. When I gathered and made all the pieces to make my object, I put them together like a puzzle. I work in a molding way.


2. What are the tools and media of my craft?

I think everything could be your tool or media. Of course there are some general tools like the sewing machine, knitting machines, etc. But you can actually choose anything you’d like. 3D printers are an easy example. But it all depends on how far you want to push your limits. For myself I really like to work by hand and experiment with different kinds of materials. As example I worked with wool, dried flowers, sugar, screen printing, polyurethane foam and drawings, buttons, patches and leftovers. All made by hand.

Pagina 9.jpg

3. What are the borders of this practice?

Personally I think the 3D printer, and not only for fashion, is the future. There are so many possibilities with the 3D printer. At the moment it is already possible to print models of certain organs and the next step is to actually print living tissue. I think this is so bizarre, because there are barely any boundries left in 3D printing. Soon everything can be printed with the 3D printer. And not only everything can be printed, i think everyone can print anything. The value of art could loose his value, because every retard can make anything he wants. I don’t want to say I’m against technologies, because sometimes you truly need to use it to make certain objects and technologies can make the proces of making something easier. But on the other hand that also could be the problem, it’s easier for everyone to make something with technology. And as soon as it’s accesable for everyone, why would anyone buy something from anyone when you can make it yourself. So I think if you want to be an artist you really have to look for a way to distinguish yourself and find a balance between technologie and handcraft. Let’s imagine everyone has a 3D printer, lasercutter, or whatever: technologies aren’t, by that time, the way anymore to distinguish yourself. So you should really find a way between technologie and handcraft to make it not accesible for everyone. And of course everyone could also copy handcrafts, but sometimes it’s just easier to buy it. The threshold could be higher because the technique is less accesable / easier to copy when it’s not produced by a machine.


4. Example of contemporary practitioners

An example of a practitioner of a fashion designer who uses 3D printing and really inspires me is Iris van Herpen.

Iris van herpen.jpg

This is an example of what Iris van Herpen made with the 3D printer, the skeleton dress. She made it a few seasons ago, and it became 

a pretty famous and revolutionary design for fashion, but i think in a while when everyone can use a 3D printer and gets how 3D printing works, it isn’t anymore. I think there will be hundreds of copies of this work. Of course the design is pretty, but it’s special because the design is made in a revolutionary way. As soon it isn’t a new way of making things anymore, it isn’t special anymore. The design will dissapear between all the look a likes.


5. Define your position of your pratice in relation to newer technologies

Normally i do everything by hand, even sewing and attaching things to my clothes, so i’m really on the start of trying new technologies for fashion. The reason why i chose to work with technologies is because it’s the year 2014. This is how the world works: with technology and it’s important to not stay behind. As an artist you should stand open for all kind of influences around you, let yourself inspire by everything that is, in stead of working with a tunnel vision set of mind. That’s why I really want to learn how to work with technology.

I do think it’s important to use technology as the tool that can provide you of what you need, not the tool to make what you want to make. 

I don’t really like to use technology because I think a lot of objects loose their roughness, like little flaws, when you make it with technology. You loose the coincidence and character of what can happen with a material when you make a mistake for example. But that is the idea I got about technology, I don’t know if that’s true since i got barely any experience with working with machines.


wiki doesn't want to upload my images ! helpp!!