Difference between revisions of "Quickstartguide:Roland"

From Publication Station
 
(27 intermediate revisions by 3 users not shown)
Line 1: Line 1:
{{Template:Quickstartguide}}
{{Template:Quickstartguide}}


== Prepare the file ==
* Open Illustrator on the iMac
* Open Illustrator on the iMac
* Open your file
* Open your file
<br>
[[File:Open on the Imac.jpg|700px]]
* If you have text, make sure you have made them into outlines. You can do it by selecting your text box and look for the option "Create Outlines" in quick actions or ---> (Type>Create Outlines/Shift+Ctrl+O)
* If you have text, make sure you have made them into outlines. You can do it by selecting your text box and look for the option "Create Outlines" in quick actions or ---> (Type>Create Outlines/Shift+Ctrl+O)
<br>
[[File:Create outlines.png|700px]]
[[File:Create outlines.png|700px]]
<br>
[[File:Outlines created.png|700px]]
[[File:Ai-text.png]]
 
<br>
== Prepare the plotter ==
[[File:Ai-text-outlines.png]]
<br>
* Set the blade or pen. Always make sure they are in place before cutting. If you don't find it inserted, look behind the plotter in the pencil holder. [[#pen|Dont know how?]]
* Set the blade or pen. Always make sure they are in place before cutting. If you don't find it inserted, look behind the plotter in the pencil holder. [[#pen|Dont know how?]]
* Place your Sheet or Roll in the plotter. [[#set|Dont know how?]]
* Place your Sheet or Roll in the plotter. [[#set|Dont know how?]]
* Select the media type on the display
* Select the media type on the display and then press the enter button.
<br>
[[File:Roll selection.jpg|400px]]
<br>
<br>
[[File:Plotter-roll-media.png]]
[[File:Piece selection.jpg|400px]]
<br>
<br>
[[File:Plotter-sheet-media.png]]
* The plotter will show you the width of the roll, and measure the width and length of your sheet. ''Verify that your graphic in Illustrator is not bigger than the plot area''
* The plotter will show you the width of the roll, and measure the width and length of your sheet. ''Verify that your graphic in Illustrator is not bigger than the plot area''
<br>
<br>
[[File:Plotter-size.png]]
[[File:Lenght sheet.jpg|400px]]
<br>
<br>
== Roland Cut Studio setups ==
* Open the CutStudioPlugin by clicking on the Illustrator menu Window>Extensions>RolandCutStudio
* Open the CutStudioPlugin by clicking on the Illustrator menu Window>Extensions>RolandCutStudio
* If you are using the <big>plotter flex</big>, <big>plottter flock</big> or <big>vinyl (for inside of a window)</big>, <big>'''make sure to mirror your design'''</big>!
[[File:Window extension.png|800px]]
* The preview box will show you what will be plot
* The preview box will show you what will be plot
[[File:Cutstudio-preview.png]]
[[File:First window extension.png|400px]]
<br>
<br>
=== Output options ===
* Depending on the setting, you may have to '''select everything in your graphic you want to plot'''
* Depending on the setting, you may have to '''select everything in your graphic you want to plot'''
* You can also set what you would like to cut through the window highlighted in the screenshot.
[[File:Cut options.png|400px]]
* To make the knife start cutting/drawing in a given position on the piece of vinyl/paper, move the knife with the arrows and then press the button "Set Origin" on the plotter. Then make sure to tick the "Move to origin box on the Roland Cut Studio extension window as shown here.
[[File:Move to origin window.png|400px]]
[[File:Originsetup.jpg|400px]]
=== Cut the design ===
* When you're ready, click the button with the plotter graphic
* When you're ready, click the button with the plotter graphic
<br>
<br>
[[File:Cutstudio-plotbutton.png]]
[[File:Cut icon.png|400px]]
<br>
<br>
* If the plotter is detected, click ''"Cut"''
* If the plotter is detected, click ''"Cut"''
[[File:Cutstudio-plotscreen.png]]
[[File:Cutstudio-plotscreen.png]]
<br>
<br>
== <span id="set"></span> Setting Media ==  
== <span id="set"></span> Setting Media ==  


When setting up the media you will need to do the following:
When setting up the media you will need to do the following:
=== Insert the vinyl sheet ===


* Set the rollers ''under'' the white markings.  
* Set the rollers ''under'' the white markings.  
Line 51: Line 68:
[[File:plotter-roll-feed.png]]
[[File:plotter-roll-feed.png]]
<br>
<br>
* When using a '''sheet''', feed it in making sure that it is under the rollers
* When using a '''sheet''', feed it in making sure that it is under the rollers; also make sure that the right side of the vinyl is facing up;
* Clamp the roll or sheet using the lever by pulling it towards you
* Clamp the roll or sheet using the lever by pulling it towards you
<br>
<br>
[[File:plotter-lever.png]]
[[File:plotter-lever.png]]
<br>
<br>
=== Types of materials you can use ===
* You can output your design on different types of vinyl and paper, both matte and shiny. Here we offer many colours and finishes (of vinyl, paper can be found in the school shop) but if you are not sure about the type you want to use for your project, ask a student assistant or tutor for advice :)
== <span id="pen"></span> Changing Pen/Blade ==
== <span id="pen"></span> Changing Pen/Blade ==


* Loosen the blade holder by screwing the silver tightener anti-clockwise
* Loosen the blade holder by screwing the silver tightener anti-clockwise
* If you are inserting a blade, make sure that it is inserted as far as it can go.
If you want to cut through '''flock''' make sure you have the correct flock blade put into the plotter. Not sure? Ask one of the tutors in the station!
When you change the blade make sure to check if the offset parameters of the blade are the correct one.
<br>
(menu > condition > offset)
'''FLOCK BLADE''' (offset 0,5mm) -> cuts only FLOCK
<br>
'''REGULAR BLADE''' (offset 0,25mm) -> cuts NORMAL VINYL and FLEX
<br>
<br>
[[File:plotter-blade.png]]
[[File:plotter-blade.png]]
Line 64: Line 97:
* If you are inserting a pen, make sure that when the holder is completely pressed the pen touches the surface you wish to draw on.
* If you are inserting a pen, make sure that when the holder is completely pressed the pen touches the surface you wish to draw on.
<br>
<br>
[[File:plotter-pen.png]]
[[File:Pen setup.jpg|600px]]
<br>
<br>
* If you are inserting a blade, make sure that it is inserted as far as it can go.
 
* Tighten the tightener by screwing it clockwise
* Tighten the tightener by screwing it clockwise
* Plot
* Plot
<br>
== Flex/Flock transferring onto fabric ==
<big>1. Once you have cut your design, remove the unwanted areas</big>
[[File:2 flex-flock transfer.jpg|400px]]
[[File:5 flex-flock transfer.jpg|400 px]]
pro tip: you can use the leftover pieces to create a new design
[[File:5-1 flex-flock transfer.jpg|400px]]
<big>2. Heat transfer press</big>
2.1 Choose the "Flex & Flock" setting from the "Presets" menu
[[File:Heat press presets menu.jpg|400px]]
2.2 Preheat your fabric <br>
2.3 Place your design on the fabric (plastic backing facing up)
[[File:6 flex-flock transfer.jpg|400px]]
2.4 let the fabric cool down before unpeeling the plastic sheet
for more detailed instruction on how the heat transfer press works: http://ps.wdka.nl/wiki/Quickstartguide:Transferpress
HAPPY PRINTING!
<br>
[[File:Printing is fun.jpg|700px]]

Latest revision as of 10:30, 7 November 2023


Prepare the file

  • Open Illustrator on the iMac
  • Open your file


Open on the Imac.jpg

  • If you have text, make sure you have made them into outlines. You can do it by selecting your text box and look for the option "Create Outlines" in quick actions or ---> (Type>Create Outlines/Shift+Ctrl+O)

Create outlines.png Outlines created.png

Prepare the plotter

  • Set the blade or pen. Always make sure they are in place before cutting. If you don't find it inserted, look behind the plotter in the pencil holder. Dont know how?
  • Place your Sheet or Roll in the plotter. Dont know how?
  • Select the media type on the display and then press the enter button.


Roll selection.jpg
Piece selection.jpg

  • The plotter will show you the width of the roll, and measure the width and length of your sheet. Verify that your graphic in Illustrator is not bigger than the plot area


Lenght sheet.jpg

Roland Cut Studio setups

  • Open the CutStudioPlugin by clicking on the Illustrator menu Window>Extensions>RolandCutStudio
  • If you are using the plotter flex, plottter flock or vinyl (for inside of a window), make sure to mirror your design!

Window extension.png

  • The preview box will show you what will be plot

First window extension.png

Output options

  • Depending on the setting, you may have to select everything in your graphic you want to plot
  • You can also set what you would like to cut through the window highlighted in the screenshot.

Cut options.png

  • To make the knife start cutting/drawing in a given position on the piece of vinyl/paper, move the knife with the arrows and then press the button "Set Origin" on the plotter. Then make sure to tick the "Move to origin box on the Roland Cut Studio extension window as shown here.

Move to origin window.png Originsetup.jpg

Cut the design

  • When you're ready, click the button with the plotter graphic


Cut icon.png

  • If the plotter is detected, click "Cut"

Cutstudio-plotscreen.png


Setting Media

When setting up the media you will need to do the following:

Insert the vinyl sheet

  • Set the rollers under the white markings.


Plotter-roller-yes.png

  • When using a roll, place it in the holder at the base of the machine


Plotter-roll-placement.png

  • Then feed the edge of the roll from the back to the front so that it is under the rollers


Plotter-roll-feed.png

  • When using a sheet, feed it in making sure that it is under the rollers; also make sure that the right side of the vinyl is facing up;
  • Clamp the roll or sheet using the lever by pulling it towards you


Plotter-lever.png

Types of materials you can use

  • You can output your design on different types of vinyl and paper, both matte and shiny. Here we offer many colours and finishes (of vinyl, paper can be found in the school shop) but if you are not sure about the type you want to use for your project, ask a student assistant or tutor for advice :)

Changing Pen/Blade

  • Loosen the blade holder by screwing the silver tightener anti-clockwise
  • If you are inserting a blade, make sure that it is inserted as far as it can go.

If you want to cut through flock make sure you have the correct flock blade put into the plotter. Not sure? Ask one of the tutors in the station! When you change the blade make sure to check if the offset parameters of the blade are the correct one.
(menu > condition > offset)

FLOCK BLADE (offset 0,5mm) -> cuts only FLOCK
REGULAR BLADE (offset 0,25mm) -> cuts NORMAL VINYL and FLEX


Plotter-blade.png

  • If you are inserting a pen, make sure that when the holder is completely pressed the pen touches the surface you wish to draw on.


Pen setup.jpg

  • Tighten the tightener by screwing it clockwise
  • Plot


Flex/Flock transferring onto fabric

1. Once you have cut your design, remove the unwanted areas

2 flex-flock transfer.jpg

5 flex-flock transfer.jpg


pro tip: you can use the leftover pieces to create a new design

5-1 flex-flock transfer.jpg


2. Heat transfer press

2.1 Choose the "Flex & Flock" setting from the "Presets" menu

Heat press presets menu.jpg

2.2 Preheat your fabric

2.3 Place your design on the fabric (plastic backing facing up)

6 flex-flock transfer.jpg


2.4 let the fabric cool down before unpeeling the plastic sheet


for more detailed instruction on how the heat transfer press works: http://ps.wdka.nl/wiki/Quickstartguide:Transferpress


HAPPY PRINTING!
Printing is fun.jpg