Quickstartguide:Transferpress

Setting up

1. Switch the machine on with the red switch on the top of the machine.

2. Go to the presets menu to choose the according settings. *What do these settings mean?

3. Put your fabric on the plate by opening the boad with the black handle

4. Press the blue handle down until it clicks to start the heating process (release the handle after you start hearing the beeping sound and the screen turns green)

There are 2 steps of heating:

1. Preheat the fabric
2. Place the material (sublimation print/flex/flock etc.) on top of the fabric

The machine automatically switches from step 1 to step 2. If you want to go back to any step you can just press the according number

Step 1

Step 2

Wait till the temperature is right. You can see the remaining time on the top of the screen. (Don't leave a hot machine unattended!)

5. To turn off the machine press the power button on the screen. This will put the machine in a stend by mode. Afterwards you can switch off the machine entirely from the red on/off switch on the top of the machine.

The Settings

• Sublimation

Sublimation print + synthetic fabric + heat transfer press

more info about the prining method: http://ps.wdka.nl/wiki/Quickstartguide:Sublimation

• Flex and Flock

Plotter + fabric + heat transfer press

more info about the prining method: http://ps.wdka.nl/wiki/Quickstartguide:Roland

• Screen Fix

To make sure your beautiful silkscreen prints on fabric don't wash away.
Screen printing with fabric paint + fabric + heat transfer press

more info about the prining method: http://ps.wdka.nl/wiki/Quickstartguide:Screenprint

• Foil

Screen Printing with glue + foil + heat transfer press

more info about the prining method: http://ps.wdka.nl/wiki/Quickstartguide:Screenprint